-
LPA2G 290 MHz - 2 GHz LPDA EMC Antenna
SKU: 3493
Antenna Factor (1 Meter): 14 to 32 db/mAntenna Type: Log Periodic AntennasConnector: N-Type, femaleDimensions: 22.6" x 20.1"Frequency Range: 290 MHz - 2 GHzGain: 6.5 dBiImpedance: 50 OhmsMax Radiated Field Strength: 200 V/mMaximum Continuous Power: 1000 WattsMounting Base: ¼ - 20 Thread, femaleVSWR: Typ. 1.45:1In Stock -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mAdditional App Notes: EFT Waveform Verification, Troubleshooting EFT FailuresIN STOCK -
RESA13G Precompliant EMC Test Receiver
SKU: 14387-1
Frequency Range: 9 kHz - 13 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR16-1-1)Limit Standards: EN550xx, GB9254, FCC Part15, User definedDetectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)EMC Compliance Standards: CISPR 16-1-1Testing Type: EMC Precompliance Testing,In Stock -
RESA3G Realtime EMC Spectrum Analyzer
SKU: 2075
Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461Frequency Range: 9 kHz - 3 GHzSweep/Test Speed: FastAmplitude Accuracy: <0.7 dBResolution Bandwidth: 1 Hz to 3 MHz$495.00In Stock -
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
SKU: 7851
Standards: EN/IEC 61000-4-6Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHzConnector: N-type femaleDimensions: 632 mm x 120 mm x 80 mmFrequency Range: 10 kHz to 1000 MHzMax. Cable Diameter: 20 mmMaximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 minTest Setup and Overview: RF Conducted Immunity Testing$595.00Typically In Stock -
3 Phase Combination Wave Generator System
SKU: 30127
Standards Met: IEC 60601-1-2, IEC/EN 61000-4-5Applications: EMC Surge, CE MarkingDUT Power Handling: 3 PH 16 AmpsIn Stock -
$1,575.00Inquire for Availability -
DC40G-10 Coaxial Directional Coupler 1-40 GHz-3
SKU: 30087
Frequency Range: 1 GHz to 40 GHzPower: 50 Watts (CW)Coupling: 10 dBInsertion Loss: 2.1 dBFlatness: ± 1.0 dBDirectivity: 10 dB min.Applications: RF Power MeasurementTest Standards: IEC 61000-4-3Inquire for Lead Time -
DC40G-30 Directional Coupler 18 GHz to 40 GHz, 30 Watts of Power
SKU: 30088
Frequency Range: 18 GHz to 40 GHzMax. Power: 30 Watts (CW)Coupling: 20 dB (typical), 21 dB (max.)Flatness: 1 dBVSWR: 1 dBDirectivity: 12 dB min, 14 typicalApplications: RF Power MeasurementTest Standards: IEC 61000-4-3Typically in Stock -
GTEM 550V Vertical GTEM
SKU: 30081
Max. EUT Size: 35(L) x 40(W) x 27(H) cm / 13 x 15 x 10 inStandards for Emissions Testing: CISPR 14-1, IEC 61000-6-3, and IEC 61000-6-4Standards Met: IEC 61000-4-20Applications: Radiated Immunity, Radiated EmissionsInquire for Lead Time -
LISN-DO160-100, 100 Amp, 5uH LISN for RTCA DO-160
SKU: 12117
Frequency Range: 9 kHz to 400 MHzCurrent: 100 Amps ContinuousInductance: 5 MicrohenryTest Standards: RTCA DO-160$3,159.00Inquire for Lead Time -
RFCP1G EMI Current Probe 10 kHz to 1GHz
SKU: 12027
Top Frequency Range: 1 GHzBottom Frequency Range: 10 kHzAC Current Handling (DC-400Hz): 200 AmpsRF Current Handling (CW/Pulse): 40/60 AmpsStyle: Clamp OnDiameter: 1.25"Transfer Impedance: 1 to 5 OhmsTest Standards: IEC 61000-4-6, DO-160, MIL-STD-461, ISO 11452-4Applications: Conducted Emissions, Radiated Emissions$1,975.00In Stock