Used Amplifiers Test Equipment, Systems & Solutions
-
Sonoma 330 Broadband RF Amplifier
SKU: 6461
Weight: 3.3 lbsApplication/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals.connectors: BNC or Type NDimensions: 3.6 x 4.3 x 7.2 inFrequency range: 10 kHz - 2.5 GHzGain: 20 dBInsertion loss: 14 dBOutput Impedance: 50 OhmsSignal power: 11.7 dB$2,950.00In Stock -
CPI VZL6943J2 TWTA High Power RF Amplifier
SKU: CPI-VZL6943J2
Frequency Range: 1 GHz to 2.5 GHzOutput Power: 300 Watts typ. (250W min.)Gain: 54dBRF Level Adjustment Range: 0 to 20 dBTypically In Stock -
CPI VZK-6901J1 K-band mmWave High Power Amplifier
SKU: CPI-VZA-6901J1-1
Max Frequency: 26.5 GHzMin Frequency: 18 GHzOutput Power: 40 WattsGain: 46 dBTest Standards: MIL-STD 461 RS103, DO-160 Section 20Applications: Radiated Susceptibility, Military and Aerospace1 Unit -
CPI VZA-6902J1 Ka-band Millimeter Wave Power Amplifier
SKU: CPI-VZA-6902J1
Max Frequency: 40 GHzMin Frequency: 26.5 GHzOutput Power: 40 WattsGain: 46 dBTest Standards: MIL-STD 461 RS103, DO-160 Section 20Applications: Radiated Susceptibility, Military and Aerospace1 Unit -
Ophir 5135 RF Power Amplifier 1 - 2 GHz, 300 Watts
SKU: sku-2179-1
Max Frequency: 2 GHzMin Frequency: 1 GHzOutput Power: 300 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: MIL-STD 461 RS103, DO-160 Section 20Gain: 56 dBAC Input Power: 208 +/-10% VAC, 50/60 Hz$49,750.00CALL FOR LEAD TIME -
-
Amplifier Research 50S1G4A Solid-State Amplifier, 50 Watts CW, 0.8 - 4.2 GHz
SKU: 4349
Weight: 100 lbs.Dimensions: 50.3 x 24.9 x 54.6 cm 19.8 x 9.8 x 21.5 inFlatness: Small Signal Flatness:±1.5 dB typical ±2.0 dB maximumFrequency Range: 0.8 – 4.2 GHzImpedance: 50 ohmsInput: Input for Rated Output 1.0 milliwatt maximumOutput: POWER OUTPUT @ 1dB COMPRESSION Nominal 70 watts Minimum 50 wattsRF Connector: Type N female$975.00In Stock -
Ophir 5155FE Class A Linear Power Amplifier
SKU: 5240
Max Frequency: 2.5 GHzMin Frequency: 800 MHzOutput Power: 250 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: MIL-STD 461 RS103, DO-160 Section 20Gain: 48 dBAC Input Power: 220 VAC, single phaseIn Stock -
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: sku-2103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing -
-
-
Amplifier Research 10W1000C 10 Watt 500 KHz - 1 GHz RF Power Amplifier
SKU: sku-1153
Max Frequency: 1 GHzMin Frequency: 500 kHzOutput Power: 10 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: IEC 61000-4-3, ISO 11451-2, MIL-STD 461, DO-160Gain: 40dBAC Input Power: 90-132V/1PH/300VACooling: Forced Air