Damped Oscillatory Wave Test Equipment, Systems & Solutions
-
NoiseKen SWCS-900-1M Damped Oscillatory Wave Tester for IEC 61000-4-18 Immunity
SKU: NO-SWCS-900-1M
Oscillation frequency: 1 MHzRepetition frequency: 400 HzRise time: 75ns± 20%Output resistance: 200Ω± 10%Output waveform: Low frequency damped oscillatory waveOutput voltage: 0.25 kV to 3.00 kV ± 10% ( 10Vstep )CDN capacity: Single or Three-phase AC 240V 20A, or DC 125V / 20ATest Standards: IEC 61000-4-18IN STOCK -
-
3ctest DOS-CS116 Damped Sinusoidal Transients Generator for MIL-STD 461 CS116
SKU: sku-636
Standards Met: MIL-STD-461 CS116Damping Rate: 15 (plus/minus 5)Oscillation Frequency: 10kHz- 100MHzRepetition Rate: single, 0.5 Hz, 1 HzSupply Voltage: 220V, 50-60 HzIn stock -
Haefely PIM 110 Ring Wave Immunity System for IEC 61000-4-12
SKU: sku-544
Impedance: 12, 30 & 200 OhmsApplications: Surge Immunity TestingRing Wave: 0.5us - 100kHz (voltage & current)Pulse repetition: 12 per minutePulse Voltage: 0.20 – 7.8kVCompliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Test duration: 5 seconds$995.00In Stock -
Haefely PIM 150 Oscillating Wave Surge Generator
SKU: 10526
Burst frequency: 100 kHz & 1 MHzCoupling: Single & Multiple PathMains & EUT Connections: HV connector & CDNSource Impedance: 200 ohmsStandards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613In Stock -
$19,500.00Inquire for Availability
-
-
-
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: sku-413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Polarity: Positive, negativeRise Time: 75ns ± 20%Rise Time-2: 5 ns ±30%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Weight: 32 kg (1-phase) 50 kg (3-phase)Slow Damped Oscillatory Waves: As Per EN/IEC 61000-4-18Burst Duration: At least 2sDamping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueDimensions: 19" / 9 HU, approx. 19" / 9 HU, approx.Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18Frequency: 100 kHz ± 10%General Data: Technical DetailsImpedance: 12ohm and 30ohm ± 20%Oscillation Frequency-2: 100kHz and 1MHz ± 10%Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;Polarity-2: Positive, negativePulse repetition: 1 to 60 transients per minuteRepetition Rate: Max. 5,000 /s ±10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Rise time: 0.5 us ± 30%Source impedance: 200ohm ± 20%Spike frequency: 100kHz ± 10%Supply Voltage: 115/230V +10/-15%Test Voltage: 250 V - 6,000 V ± 10%Voltage-2: Voltage (o.c.) at HV output 250 V - 3,000 V ± 10% Voltage (o.c) at line output 250 V - 2,500 V ± 10% -
$1,975.00
-
Rent Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator
SKU: sku-250
Burst duration: 2 seconds to continuousBurst frequency: 100kHz & 1MHzCoupling: Single & Multiple PathMains & EUT Connections: HV connector & CDNPolarity: Positive, Negative & AlternatingPulse current (short circuit): 16A ac/dc per pathPulse repetition: 40 Hz & 400HzPulse voltage (open circuit): 480Vac (phase - phase) / 110VdcRise time: 75nsSource Impedance: 200 ohmsStandards Met: IEC 61000-4-12 Power & Data lines; ANSI C37.90.1-2002 Power lines; IEC 60255-22-1 Measuring relays and protection equipment; IEEE 1613 Substation EquipmentTest Voltage: 0.25 âÃÂà3.3kV