Clearance Categories
Clearance Test Equipment, Systems & Solutions
-
Teseq NSG 4070-75 RF Immunity System
SKU: 8435
Frequency Range: 150 kHz – 230 MHzOutput Power: 75 WattsMax Test Levels: 30 V EMFTest Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Bulk Current Injection Testing, RF Conducted Immunity$1,750.00In stock -
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: sku-334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3VFrequency Range (w/ built-in amplifier): 150 kHz - 230 MHz -
Sorensen SGA160/63 Programmable Precision High Power DC Power Supply
SKU: sku-2249
Max Voltage: 160 VoltsMax Current: 63 AmpsTotal Power: 10 kWInput Power: 220V/1PHRENTAL ONLY -
Tektronix TDS3052C Oscilloscope 500 MHz
SKU: sku-2247
Bandwidth: 500 MHzChannels: 2Sample rates on all channels: 5.0 GS/sstandard record length on all channels: 10 kcontinuous waveform capture rate: 3,600 wfms/s -
-
-
-
$699.00
-
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: sku-2103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing -
-
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
SKU: sku-2080
Test Standards: EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111and UL6095Electric Tests: Electrical Analyzer AC/DC Hipot, Insulation, Ground BondGround Bond Testing: up to to 30A ACProgrammable Output Voltage: up to 5KV AC and 6KV DC$3,995.00IN STOCK -