Signal Boosters

(Showing 12 of 20)

Used inbetween close field probes and the measuring device (Spectrum analyzer or EMI receiver) to maximize performance of the probes and help identify problem areas while taking real time measurements.

Show 12

Signal Boosters Test Equipment, Systems & Solutions

  • Test AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

    SKU: sku-2353

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 7 GHz
    Gain: 30 dB typical (25 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: + 3 dBm @ 1 dB compression
    VSWR: 2.2:1 Input; 1.8:1 Output
  • PA2500M Low Noise Amplifier, 1 - 2500 MHz

    SKU: sku-1837

    Weight: 1.45 lbs (2.5 with Internal Battery)
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f) (Inquire for SMA or BNC)
    Dimensions: 4.25" x 2.31" x 6.73"
    Frequency Range: 1 MHz - 2500 MHz
    Gain: 31.5 dB typical (30 dB minimum)
    Input: 120 VAC regulated P/S or 12 VDC Battery
    Maximum Continuous Power: + 20 dBm @ 1 dB compression
    VSWR: 2:1 Max
    $1,195.00
  • Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

    SKU: sku-368

    Weight: 1 lb. (0.45 kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
    Dimensions: 83 x 42 x 25 mm (3.27 " x 1.65" x 0.985")
    Flatness: ± 2 dB
    Frequency Range: 10 MHz - 1000 MHz
    Gain: 21 dB
    Input: Max Input: 2 VDC, +10 dBm
    Maximum Continuous Power: 6 VDC, 0.5 A
  • Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

    SKU: sku-367

    Weight: 3.3 lbs. (1.5 kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
    Battery: Battery Pack: Two 6 V, 0.7 A NimH
    Connector: BNC (f)
    Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
    Flatness: (+/-) 2 dB
    Frequency Range: 100 Hz - 30 MHz
    Gain: 28 dB
    Impedance: 50 Ohms
    Input: Max. DC Input 10 VDC, 2 dBm Input Power 12 VDC, 500 mA
  • Com-Power PAM-118A High Gain EMC Broadband Preamplifier, 500 MHz - 18 GHz, 40 dB Gain

    SKU: sku-217

    Weight: 2.5 lbs (1.1 3Kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
    Connector: 50Ω Precision N-type (female)
    Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)
    Frequency Range: 500 MHz - 18 GHz
    Gain: 40 dB typical (± 2.5 dB flatness)
    Input: 15 VDC, 500 mA
    Maximum Continuous Power: +102dBm @ 1 dB compression
    RF Input Voltage: 0 Vdc (max)
    VSWR: 2.2:1 maximum
  • Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

    SKU: sku-216

    Weight: 3.3 lbs. (1.5 kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
    Connector: 50Ω N-Type (f)
    Dimensions: 7.5 x 5 x 3 inches
    Frequency Range: 1 GHz - 6 GHz
    Gain: 30 dB typical (± 1.5 dB flatness)
    Input: 10 VDC, 2 dBm
    Maximum Continuous Power: +13 dBm @ 1 dB compression
    VSWR: 2.1:1 Input/1.8:1 Output
  • Com-Power PAM-103 1 MHz - 1000 MHz Preamplifier for EMI/EMC Measurements

    SKU: sku-215

    Weight: 3.3 lbs. (1.5 kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
    Connector: 50Ω N-Type (f)
    Dimensions: 7.5 x 5 x 3 inches
    Frequency Range: 1 MHz - 1000 MHz
    Gain: 33 dB typical (± 3 dB flatness)
    Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
    Maximum Continuous Power: +4 dBm @ 1 dB compression
    VSWR: 1.3:1
  • Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

    SKU: sku-214

    Weight: 2.5 lbs (1.1 3Kg)
    Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
    Connector: 50Ω 2.9mm female
    Dimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 42 dB typical (± 2 dB flatness)
    Input: +15Vdc, 500 mA
    Maximum Continuous Power: +10 dBm @ 1 dB compression
    VSWR: 2.25:1 maximum
  • AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

    SKU: sku-213

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.
    Connector: 2.9mm(f) to 2.9mm(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 37 dB typical (33 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA
    Maximum Continuous Power: +8 dBm @ 1 dB compression
    VSWR: less than 2.9:1 typical

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.