EM Test Conducted LF/RF Immunity

EM Test Conducted LF/RF Immunity Test Equipment, Systems & Solutions

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: sku-251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  View Product Cart

• 

  Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-921

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product Cart

• 

  EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-410

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product View Product

• 

  Rent EM Test CWS 500D RF Simulator for MIL-STD-461 CS114 & More

  SKU: sku-291

  Test Standards: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20

  Applications: Bulk Current Injection Testing, RF Conducted Immunity

  Typically In Stock

  View Product Cart

• 

  EM Test CWS 500N4 Common-Mode Disturbance Simulator for IEC 61000-4-16 & IEC 61000-4-19

  SKU: sku-254

  Weight: Approx. 30kg

  Dimensions: 555mm x 448mm x 286mm

  Frequency Range: 10Hz to 165kHz

  Max input power: 600 Watts

  Output: For output characteristics reference data sheet

  Supply Voltage: 115V - 230V +10/-15%, 50/60Hz

  View Product Cart

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: sku-252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  View Product Cart

• 

  Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

  SKU: sku-253

  Weight: Approx. 36kg

  Amplifiers: low-frequency signal source with amplifier

  Dimensions: 19"/6HU (555mm x 448mm x 286mm)

  Frequency range: 10Hz - 250kHz

  General Data: Technical Details

  Harmonic Distortion (THD): less than -20dBc at 100W power 0.5ohm

  Operating Temperature: 10°C - 40°C

  Signal current: Max. 15A rms

  Signal level: 0.001V - max. 7Vrms (14Vrms)

  Signal power: 100W (nominal)

  Supply Voltage: 115V or 230V +10/-15%, 50/60Hz

  View Product Cart