IEC 61000-4-6 EM Clamps

Com-Power CLEM-6146 RF Injection Device for Conducted Immunity

• Standards: EN/IEC 61000-4-6
• Frequency Range: 10 kHz to 1000 MHz
• Maximum Continuous Power: 10 kHz to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

• Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
• Frequency Range: 10 kHz to 1000 MHz
• Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
• Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

• Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
• Frequency Range: 10 kHz to 1000 MHz
• Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
• Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW

• Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
• Frequency Range: 10kHz - 1GHz
• Maximum Continuous Power: 100 watts CW for 15 minutes
• Standards Met: IEC/EN 61000-4-6;

Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

• Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6
• Frequency Range: 150 kHz to 1000 MHz
• Standards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326

Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

• Frequency Range: 30 MHz to 1000 MHz

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

• Standards: EN/IEC 61000-4-6
• Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
• Frequency Range: 10 kHz to 1000 MHz
• Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Com-Power CLA-150 32mm Absorbing Clamp

• Aperture: 34.9 mm (1.37 inches)
• Application/Test Type: Measurement of direct field strength from EUT supply cables
• Frequency Range: 30 MHz to 1000 MHz
• Standards Met: CISPR 14

Com-Power CLA-050 10mm Absorbing Clamp

• Aperture: 12.7 mm (0.5 inches)
• Application/Test Type: Measurement of direct field strength from EUT supply cables
• Frequency Range: 30 MHz to 1000 MHz
• Standards Met: CISPR 14

Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6

• Frequency Range: 150 kHz to 1000 MHz
• Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

• Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
• Frequency Range: 10 kHz to 1000 MHz
• Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
• Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances