International (IEC/EN)

(Showing 12 of 85)

Rent IEC 61000 Test EquipmentThe EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form        

Show 12 24 36 48
  • SKU: sku-2206

    LPA7G 290 MHz - 7 GHz Log Periodic Antenna

    Weight: 1.5 lbs
    Antenna Factor (1 Meter): 15 to 47 db/m
    Antennas: Log Periodic Antennas
    Connector: N-Type, female
    Dimensions: 26.3" x 20.1"
    Frequency Range: 290 MHz - 7 GHz
    Gain: 5.8 dBi
    Impedance: 50 Ohms
    Max Radiated Field Strength: 200 V/m
    Maximum Continuous Power: 1000 Watts
    Mounting Base: ¼ - 20 Thread, female
    VSWR: Typ. 1.65:1
    $4,395.00
  • EM Test

    SKU: sku-2169

    EM Test Surge, EFT, PQF, Ring Wave Immunity System for 3 Phase, 100 Amp EUT

    Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts, Ring Wave
    Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-12 IEC/EN 61000-4-29
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    Max EUT AC Voltage (w/ Built in CDN): 480 Volts
    Max EUT AC Current (w/ Built in CDN): 100 Amps (Per Phase)
    Max EUT DC Voltage (w/ Built in CDN): 1000 Volts
    Max EUT DC Current (w/ Built in CDN): 100 Amps
    Peak inrush current capability: 500 Amps
    EFT/Burst Pulse Output Capability: 5.5 kV
    Combination/Wave Surge Output Capability: 6.6 kV
    External Coupling: Data Lines (EFT & Surge)
    Dips & Interrupts: 40%, 70%, 80%; Interrupts - 0% (short and open)
    Ring Wave: 100 kHz, 6 kV
    RENTAL ONLY
  • EM Test

    SKU: sku-1195

    Complete IEC/EN Test Rack for CE Marking and Conducted Immunity Certification

    Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations
    Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    Max EUT AC Voltage (w/ Built in CDN): 264 Volts
    Max EUT AC Current (w/ Built in CDN): 16 Amps
    Max EUT DC Voltage (w/ Built in CDN): 220 Volts
    Max EUT DC Current (w/ Built in CDN): 10 Amps
    Peak inrush current capability: 500 A (at 230 V)
    EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA
    Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)
    External Coupling: Data Lines (EFT & Surge), 3PH EUT
  • EM Test

    SKU: sku-921

    Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

    Weight: 17 kg (37.5 Pounds)
    Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
    Dimensions: 19"/3 HU
    Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
    Impedance: 50 Ohms
    Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)
    Maximum Continuous Power: 80W (nominal)
    Standards Met: IEC 61000-4-6
    Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service
    Voltage Rating: 1 V to 30 Volts Max
  • Thermo Keytek

    SKU: sku-801

    Thermo Fisher Keytek ECAT High Voltage Burst/EFT Generator up to 8 kV

    Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
    Burst frequency: Adjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kV
    Burst time: 1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolution
    Polarity: Positive, negative, alternating
    Pulse amplitude: 200V to 8.0kV, ±10%; 5 V resolution
    Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEEE C62.41, UL 864, ANSI/IEEEC62.41, UL 1449
    In Stock
  • Schloder

    SKU: sku-791

    Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A

    Application/Test Type: unscreened supply lines (mains) AC + DC
    Current Rating: 16A / 32A / 63 A / 100 A
    Dimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on model
    Frequency Range: 150 kHz to 230 MHz
    Mains & EUT Connections: banana sockets
    RF Connector: 50 Ω BNC (Female)
    Standards Met: IEC / EN 61000-4-6
    Voltage Rating: up to 250 VAC / 400 VDC
  • SKU: sku-785

    Turn-Key Solution for EFT/Burst, Surge Combination Wave with 3-Phase CDN and EFT Clamp up to 5 kV

    Phase synchronization: 0° - 360°
    Polarity: positive / negative / alternate
    Application/Test Type: Complete CE Mark Solution
    Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
    Burst frequency: 1 Hz – 1,000 kHz
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: Included
    Event time: unlimited
    Phase synchronization-2: – 359° with 1° steps or asynchronous mode
    Polarity-2: positive / negative / alternate
    Pulse amplitude: 0.2 – 5.0 kV
    Pulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)
    Pulse repetition: automatic 2 s – 100 min (Manual and external triggering available)
    Pulse voltage (open circuit): 0.2 – 5.0 kV ±10% (1.2 us ±30% risetime)
    Repetition time: 50 ns ±30% at 50 Ohm 50 ns –15 +100 ns at 1'000 Ohm
    Test duration: 0:01 min - 99:59 min or endless