PMM L2-16B LISN/Line Impedance Stabilization Network - The EMC Shop

PMM L2-16B LISN

Condition:
Used
Frequency Range:
9 kHz to 30 MHz
Standards Met:
FCC Part 15
Continuous Rated Output Current:
16 A
Maximum Permissible Operating Voltage:
250 VAC; 350 VDC
Equivalent Circuit:
50 Ω // (5 Ω+ 50 μH)
RF Output Connector:
BNC female
EUT connection:
SCHUKO connector
Applications:
Conducted Emissions, BCI Testing , Automotive EV EMC
Manufacturer:
PMM
Online Orders Ship Same Day
$2,750.00

 

SKU:
6763-PU-1-1
Availability:

In Stock

Getting Started...

Overview

The EMC Shop is an ISO 17025 accredited calibration company with the PMM L2-16B LISN in stock available for sale or rental. Repair and refurbishment services available as well. Contact us now for application support.

The PMM L2-16B is a LISN (Line Impedance Stabilization Network) which is capable of generating a maximum output current of 16A. This LISN can be used to measure the conducted noise on the power line of single phase AC and DC powered devices. The L2-16B is designed to perform EMC pre-compliance testing in the frequency range of 9 kHz to 30 MHz. It is also possible to measure more accurately by adjusting the frequency range to 150 kHz to 30 MHz.

The L2-16B has an Artificial hand circuit and has local and remote control via PMM EMI receivers. The LISN should be connected between the EUT (Equipment Under Test) and the power source to accurately measure conducted noise without interference from the power source. The conducted noise can be measured with respect to the Neutral-line and the Phase-line. The L2-16B complies with EMC standards CISPR 16-1-2, VDE 0876 and FCC part 15.

Videos

Key Considerations

Manufacturer:
PMM
Frequency Range:
9 kHz to 30 MHz
Standards Met:
FCC Part 15
Continuous Rated Output Current:
16 A
Maximum Permissible Operating Voltage:
250 VAC; 350 VDC
Equivalent Circuit:
50 Ω // (5 Ω+ 50 μH)
RF Output Connector:
BNC female
EUT connection:
SCHUKO connector
Applications:
Conducted Emissions, BCI Testing , Automotive EV EMC

Related EMC Equipment & Solutions

PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

SKU: sku-264

Weight: 50 kg (110 pounds)
Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)
Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 4P5W connector
RF Connector: BNC (f)
Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)
View Product Cart
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15 - The EMC Shop

PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

SKU: sku-57

Weight: 50 kg (110 pounds)
Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
Current Rating: 63 Amps Max
Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 63 A IEC connector
RF Connector: BNC (f)
Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)
CISPR 16-1-2: Yes
DO-160F: Yes
CISPR 22: Yes
FCC: Yes
ANSI C63.4: Yes
View Product Cart
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

SKU: 10058

Weight: 70 kg (154 pounds)
Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)
Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard
RF Connector: BNC (f)
Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)
View Product Cart
PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC - The EMC Shop

PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

SKU: sku-53

Weight: 16.5 kg (40 pounds)
Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
Dimensions: 342 x 254 x 510 mm (13.5 x 10 x 20 inches)
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
RF Connector: BNC (f)
Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
CISPR 16-1-2: Yes
DO-160F: Yes
CISPR 22: Yes
FCC: Yes
ANSI C63.4: Yes
$5,895.00
Ordering Options
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

SKU: sku-62

Weight: 248 kg (546 pounds)
Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits
Current Rating: 300 Amps continuous (500 Amps for 20 minutes)
Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass
Input: 230 V - 50/60 Hz, 50 VA each line
Mains & EUT Connections: M14 bolts
RF Connector: BNC (f)
RF Input Voltage: BNC (f)
Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form