dbSAFE MAX Modular Walk-In RF Shield Room

dbSAFE MAX Modular RF Shield Room

Condition:
Used
  • Isolation Performance better than 90 dB to 3 GHz, 85 dB to 6 GHz, 80 dB to 18 GHz
  • Suitable for testing between 300 MHz and 18 GHz with P50 absorber
  • Better isolation and performance from 20 MHz to 1 GHz with ferrite (optional)
  • ≥ 90 dB Isolation to 3 GHz, ≥ 85 dB  to 6 GHz, ≥ 85 dB  to 18 GHz
  • External fold out workbench for system equipment and technician
Construction:
Welded aluminum
Module Weight:
~ 350 LBs (without absorber)
Module Dimensions:
75.00" x 40.00" x 75.00"
Module Connections:
Two Point Compression Latching System
RF Gaskets:
Triple Layer Braid Over Foam
HOG:
Y

 

No reviews yet Write a Review
Availability:

Inquire for Availability

SKU:
498001

 

 

Due to tariff increases, some items in our catalog are subject to additional costs when purchased.

Getting Started...

Check out our Google Reviews

Overview

The dbSAFE MAX is a mobile, high qualify RF shield room. Designed to support pre-compliance EMC testing and OTA performance evaluation, isolating the test environment from other lab electronics only feet away. Utilize the enclosure as a controlled RF environment for product evaluation and immediate design change validation.

Modules are 40" wide, allowing for easy movement and placement in minutes versus the months required to design, permit and construct an anechoic test chamber.

Two end cap modules are required at minimum, making  internal dimensions 80" long, with the fixed width and height of 75". Each module ads or retracts the shield room by a meter. Three dBSAFE MAXEXTEND modules can be utilized for 3 meter radiated testing.

Rent dBSAFE MAX modules to configure different sized, walk-in shield rooms. The EMC Shop specializes in pre compliance radiated emissions and immunity testing.

  • Highly effective, quick setup EMC pre compliance test enclosure
  • Customizable/Swappable IO panel
  • Casters for easy movement and re-placement
  • Two Point Compression Latching System
  • Split Build with Foldable Handles
  • Foldable Shelf for System's Equipment
  • Includes Antenna Mounting Structure with Multiple Manual Positioning Points
  • Internal Dimensions (W x D x H: 75.00" x 80.00" x 75.00")
  • Surface coated to MIL-DTL-5541F
  • ≥ 90 dB Isolation to 3 GHz, ≥ 85 dB 
  • Suitable for testing between 300 MHz and 18 GHz with P50 absorber
  • Better isolation and performance from 20 MHz to 1 GHz with ferrite (optional)
  • External fold out workbench for system equipment and technician

dBSAFE MAXEXTEND

  • Two Point Compression Latching System
  • Includes Casters
  • Internal Dimensions (W x D x H: 75.00" x 40.00" x 75.00")

Videos

Key Considerations

Construction:
Welded aluminum
Module Weight:
~ 350 LBs (without absorber)
Module Dimensions:
75.00" x 40.00" x 75.00"
Module Connections:
Two Point Compression Latching System
RF Gaskets:
Triple Layer Braid Over Foam
HOG:
Y

Downloads

Related EMC Equipment & Solutions

Low Band E-Field Generator Configuration

MIL-STD-461 RS103 Radiated Susceptibility Test System

SKU: 12852

  • Configurable radiated susceptibility test system based on needs, available equipment and any other unique consideration.
  • 80 MHz - 18 GHz are commonly configured systems with options to to go up to 26.5 or 40 GHz and down to 2 MHz or 10 kHz. ranges configured
  • Achieve field strengths to 200 V/m per MIL-STD-461 RS103 or variations with higher field or pulse levels.
  • Rental test equipment and systems typically in stock.
Typically In Stock
VIEW PRODUCT
Teseq ITS 6006 Radiated Immunity Test System

Teseq ITS 6006 Radiated Immunity Test System

SKU: 11290

Frequency Range: 80 MHz to 6 GHz
Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL
Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω
Reference frequency: 10 MHz
In Stock
VIEW PRODUCT