Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

Weight:
3.3 lbs. (1.5 kg)
Application/Test Type:
Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector:
50Ω N-Type (f)
Dimensions:
7.5 x 5 x 3 inches
Frequency Range:
1 GHz - 6 GHz
Gain:
30 dB typical (± 1.5 dB flatness)
Input:
10 VDC, 2 dBm
Maximum Continuous Power:
+13 dBm @ 1 dB compression
VSWR:
2.1:1 Input/1.8:1 Output
Manufacturer:
Com-Power
Online Orders Ship Same Day

 

SKU:
sku-216

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured. The PAM-6000 has a small gain variation of ±1.5 dB. It can be powered by the rechargeable NimH batteries (included) when an external power source is not available.

Com-Power PAM-6000 Features:

  • Broadband Frequency Range of 1 GHz - 6 GHz
  • Low Noise Figure: 4 dB typical
  • High Gain: 30 dB
  • Low VSWR: 2:1 Input/1.8:1 Output
  • Output Power: +13 dBm @ 1 dB compression
  • Flatness: ± 1.5 dB
  • Reverse Isolation: Greater than 30 dB
  • Impedance: 50 Ohms
  • Connector: N-type (f)

Key Considerations

Manufacturer:
Com-Power
Weight:
3.3 lbs. (1.5 kg)
Application/Test Type:
Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector:
50Ω N-Type (f)
Dimensions:
7.5 x 5 x 3 inches
Frequency Range:
1 GHz - 6 GHz
Gain:
30 dB typical (± 1.5 dB flatness)
Input:
10 VDC, 2 dBm
Maximum Continuous Power:
+13 dBm @ 1 dB compression
VSWR:
2.1:1 Input/1.8:1 Output

Related EMC Equipment & Solutions

Com-Power PAM-118A High Gain EMC Broadband Preamplifier

Com-Power PAM-118A High Gain EMC Broadband Preamplifier

SKU: 10217

Weight: 2.5 lbs (1.1 3Kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector: 50Ω Precision N-type (female)
Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)
Frequency Range: 500 MHz - 18 GHz
Gain: 40 dB typical (± 2.5 dB flatness)
Input: 15 VDC, 500 mA
Maximum Continuous Power: +102dBm @ 1 dB compression
RF Input Voltage: 0 Vdc (max)
VSWR: 2.2:1 maximum
Inquire for Availability
View Product Cart
Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

SKU: 10214

Weight: 2.5 lbs (1.1 3Kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector: 50Ω 2.9mm female
Dimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)
Frequency Range: 18 GHz - 40 GHz
Gain: 42 dB typical (± 2 dB flatness)
Input: +15Vdc, 500 mA
Maximum Continuous Power: +10 dBm @ 1 dB compression
VSWR: 2.25:1 maximum
Inquire for Availability
View Product Cart
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

SKU: 10215

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector: 50Ω N-Type (f)
Dimensions: 7.5 x 5 x 3 inches
Frequency Range: 1 MHz - 1000 MHz
Gain: 33 dB typical (± 3 dB flatness)
Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power: +4 dBm @ 1 dB compression
VSWR: 1.3:1
Inquire for Availability
View Product Cart
AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

SKU: sku-213

Weight: 1.1 lbs. / 0.5 kg
Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.
Connector: 2.9mm(f) to 2.9mm(f)
Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
Frequency Range: 18 GHz - 40 GHz
Gain: 37 dB typical (33 dB minimum)
Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA
Maximum Continuous Power: +8 dBm @ 1 dB compression
VSWR: less than 2.9:1 typical
View Product Cart
AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

SKU: 3727

Connector: N(f) to N(f)
Frequency Range: 20 MHz - 2000 MHz
Gain: 30.4 dB typical (29.5 dB minimum)
Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA
Maximum Continuous Power: + 6 dBm @ 1 dB compression
VSWR: 1.5:1 Input; 1.8:1 Output
Test Standards: CISPR 11, CISPR 32, FCC Part 15
$149.00
Typically In Stock
Ordering Options
Com-Power ABM-6000 1 GHz to 6 GHz Microwave Biconical Antenna

Com-Power ABM-6000 1 GHz to 6 GHz Microwave Biconical Antenna

SKU: sku-351

Weight: 13 oz. (0.368 kg)
Antenna Factor (1 Meter): 32 to 46 dB/m
Antennas: Biconical Antennas
Application/Test Type: Radiated emissions and immunity
Connector: N-type (female)
Dimensions: Overall Length 20.5 inches (52 cm) Max. Width (elements) 2.5 inches (6.35 cm)
Frequency Range: 1 to 6 GHz
Gain: -3 to 4.5 dBi
Impedance: 50 Ohms
Maximum Continuous Power: 50 Watts
VSWR: 3:1 (average)
View Product Cart
Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

SKU: sku-368

Weight: 1 lb. (0.45 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Dimensions: 83 x 42 x 25 mm (3.27 " x 1.65" x 0.985")
Flatness: ± 2 dB
Frequency Range: 10 MHz - 1000 MHz
Gain: 21 dB
Input: Max Input: 2 VDC, +10 dBm
Maximum Continuous Power: 6 VDC, 0.5 A
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form