RF Field Strength Meters Test Equipment, Systems & Solutions
-
Wavecontrol SMP3 RF Field Meter
SKU: 8899
Frequency Range: DC to 60 GHzBattery Life: >24 HoursReadout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)Measurement Range: 0.2 - 1000 V/mHigh Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 HzProbe Selection: E & H Field (DC - 60 GHz)More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.Typically In Stock -
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter
SKU: 12955
Frequency Range: 0 Hz (DC) to 90 GHzDisplay type: Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels)Brightness: Manual control or automatic control via brightness sensorFast data transmission: Optical interface, Ethernet, USB-COperating languages: Largely language-independent measurement control via symbols. Menu languages: English, German, more are planned.Typically In Stock -
Narda NBM-520 Broadband Field Meter, 100 kHz - 60 GHz
SKU: 6278
Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probesBattery Life: 20 hoursRecharging Time: 2 hoursCalibration Status: NIST (5/22/2023)PC Interface: Fiber Optic via USB (6 ft cable)Software: NBM-TS, Tile, EMCWare, EMC32Videos: Software Setup$450.00In Stock -
Wavecontrol SMP2 Broadband Field Strength Meter
SKU: 7056
Weight: 10.6 oz.Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 1.5 x 2.0 x 8 inchesFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hoursStandards Met: IEC 61000-4-3IN STOCK -
Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz
SKU: sku-885
Weight: 10.6 oz.Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 1.5 x 2.0 x 8 inchesFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hoursStandards Met: IEC 61000-4-3$595.00Typically In Stock -
PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz
SKU: sku-611
Weight: 450 gApplication/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: 2 ea. AA type, re-chargeable batteriesDimensions: 96x64x465 mmFrequency Range: varies on probeOperation Time: 8 hours (typical)Probe Holder Tip: BNCRecharging Time: re-charged via supplied chargerRF Field Probes: E-FieldStandards Met: IEC/EN 61000-4-3 -
Narda SRM-3000 Selective Radiation Meter
SKU: 5773
Frequency range: 100 kHz to 3 GHzModes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time AnalysisUpper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)Display range: From noise floor up to +26 dBmMaximum RF power: +30 dBmApplications: RF Interference Analysis and EMF SniffingIntrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuationRF Input Type: N connector, 50 Ω$495.00In Stock -
RFM Radiation Meter
SKU: 12155
Frequency Range: 5 kHz - 60 GHzMeasurement Range: 10 mV/m-1000 V/mAccuracy: 0.1% +/- 0.5 dBBattery Life: 8 HoursTypically In Stock