Field & Survey Meters

Field & Survey Meters Test Equipment, Systems & Solutions

• 

  Wavecontrol SMP3 RF Field Meter

  SKU: SMP3

  Frequency Range: DC to 60 GHz

  Battery Life: >24 Hours

  Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)

  Measurement Range: 0.2 - 1000 V/m

  High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz

  Probe Selection: E & H Field (DC - 60 GHz)

  More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.

  Ships within 24 hours.

  View Product Cart

• 

  Narda NBM-520 Broadband Field Meter, 100 kHz - 60 GHz

  SKU: 6278

  Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probes

  Battery Life: 20 hours

  Recharging Time: 2 hours

  Calibration Status: NIST (5/22/2023)

  PC Interface: Fiber Optic via USB (6 ft cable)

  Software: NBM-TS, Tile, EMCWare, EMC32

  Videos: Software Setup

  MSRP:

  Was:

  Price Now:

  $450.00

  In Stock

  Ordering Options

• 

  Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

  Frequency Range: 0 Hz (DC) to 90 GHz

  Display type: Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels)

  Brightness: Manual control or automatic control via brightness sensor

  Fast data transmission: Optical interface, Ethernet, USB-C

  Operating languages: Largely language-independent measurement control via symbols. Menu languages: English, German, more are planned.

  View Product Cart

• 

  Narda NBM-550 Broadband Field Meter, 100 kHz - 60 GHz

  SKU: sku-612

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 19.5 mm in height

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Videos: Software Setup

  Typically In Stock

  View Product Cart

• 

  Wavecontrol SMP2 Broadband Field Strength Meter

  SKU: sku-2067

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC/EN 61000-4-3

  IN STOCK

  View Product Cart

• 

  Narda SRM-3000 Selective Radiation Meter

  SKU: Narda SRM-3000

  Frequency range: 100 kHz to 3 GHz

  Modes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time Analysis

  Upper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)

  Display range: From noise floor up to +26 dBm

  Maximum RF power: +30 dBm

  Maximum DC voltage: 50 V

  Intrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuation

  RF Input Type: N connector, 50 Ω

  IN STOCK

  View Product Cart