PMM / Narda

(Showing 12 of 35)

PMM is an Italian manufacturer of EMC Test Equipment and is sister companies with Narda Safety Solutions, a manufacturer of safety equipment against RFI and radiation.

Show 12 24

PMM / Narda Categories

PMM / Narda Test Equipment, Systems & Solutions

  • Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

    SKU: 12955

    Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz
    Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground
    Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)
    Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)
    Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016
    Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601
    Battery Life: 16 Hours (2-4 Hour Recharge)
    Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope
    $495.00 - $1,850.00
    Typically In Stock
  • Narda PMM 7010 EMI Test Receiver

    SKU: 10025

    Frequency Range: 9 kHz to 3 GHz
    App Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,
    Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector function
    Pre-programmed Test Limits: CISPR 11, CISPR 22
    Sweep/Test Speed: Slow
    Other Features: Built-in LISN (1PH/16A)
    Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC
    $495.00 - $2,375.00
    IN STOCK
  • Narda EFD-9091 E-Field Probe 100 MHz to 90 GHz

    SKU: 8485

    Measurement Range: 0.5 to 400 V/m (CW), Typ. 0.5 to 61.4 V/m (True RMS)
    Dynamic Range: 58 dB (nominal)
    Flatness: ±3 dB (300 MHz to 40 GHz), +3/-6 dB (100 MHz to 60 GHz)
    Isotropic Deviation: ±1.25 dB (100 MHz to 10 GHz), ±2 dB (>10 GHz to 26.5 GHz)
    Applications: Radio link, telecommunications, satellite, and radar
    In Stock
  • PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

    SKU: sku-611

    Weight: 450 g
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Battery: 2 ea. AA type, re-chargeable batteries
    Dimensions: 96x64x465 mm
    Frequency Range: varies on probe
    Operation Time: 8 hours (typical)
    Probe Holder Tip: BNC
    Recharging Time: re-charged via supplied charger
    RF Field Probes: E-Field
    Standards Met: IEC/EN 61000-4-3
  • PMM (Narda) 6000N Power Amplifier 9 kHz - 230 MHz, up to 15 W

    SKU: sku-490

    Weight: 4,5 kg
    Amplifiers: Power Amplifiers
    Dimensions: 257 x 115 x 316 mm
    Frequency range: 9 kHz to 230 MHz
    General Data: Technical Details
    Harmonic Distortion (THD): less than -20 dBc
    Operating Temperature: +10 °C to +40 °C
    Signal power: 10 W; 15 W from 150 kHz to 80 MHz
    Supply Voltage: 85 - 264 Vac or 120 - 370 Vdc, 47 - 440 Hz, 60 W
  • PMM (Narda) 6630 USB RF Power Sensor 9 KHz - 3 GHz, 1 W

    SKU: sku-470

    Weight: 0.12 kg
    Dimensions: 30 x 30 x 95 mm
    General Data: Technical Details
    RF Field Probe Connector: N male, 50 Ω
    RF Field Probe Frequency Range: 9 kHz to 3 GHz
    RF Field Probe Max SWR: 10 kHz to 300 kHz 1,10 from +30 dBm to -9 dBm 300 kHz to 100 MHz 1,05 100 MHz to 1 GHz 1,10 1 GHz to 3 GHz 1,25 10 kHz to 3 GHz 1,20 from -9 dBm to -40 dBm
    RF Field Probe Maximum Input Power: 2 W peak envelope max 300 ms
    RF Field Probe Measurement Accuracy: less than 0,35 dB
    RF Field Probe Power Linearity: -40 dBm to +30 dBm @ 50 MHz 0,2 dB
    RF Field Probe Power Measurement Range: 100 nW to 1 W (-40 dBm to +30 dBm)
    RF Field Probes: Power Sensor
    Supply Voltage: 5 Volt DC – 100 mA (from USB Port)
  • PMM (Narda) AS-05 Broadband Antenna Set, 30 MHz - 18 GHz

    SKU: sku-457

    Weight: 1.8/1.1/.25 kg.
    Antenna Factor (1 Meter): 8 to 14 dB/m typical/12 to 40 dB/m typical/36 to 41 dB/m typical
    Antennas: (BC-01, LP-04, DR-01)
    Application/Test Type: Radiated EMC
    Connector: N-Type(female)
    Construction: aluminum
    Dimensions: see description
    Frequency Range: 30 MHz - 200 MHz/200 MHz to 6 GHz/6 to 18 GHz
    Gain: -15 +2 dBi typical/6 dBi typical/9 to 16 dBi typical
    Impedance: 50 Ω nominal
    Max input power: 100/100/150W
    Maximum Continuous Power: 100 Watts up to 1 GHz (75 watts up to 6 GHz)

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.