EMC Partner MIG1206
The EMC Partner MIG1206 is a combination wave surge generator (1.2/50 and 8/20) with maximum output 12kV/6kA. The impulse is according to IEC 61000-4-5 and can be used together with the Coupling Decoupling Network CDN-MIG12-32 to superimpose impulses onto power lines. The peak output voltage and current of the generator are indicated on the display. Two BNC monitor outputs allow monitoring of the voltage and current wave shapes on an oscilloscope.
[split]
-
EMC Partner MIG Series, Combination Wave Generator according to IEC 61000-4-5,12kV/6kA 2 Ohm with automatic single phase coupling network 480V and 32A
- according to IEC 61000-4-5,12kV/6kA
- 2 Ohm with automatic single phase coupling network 480V and 32A.
Physical Specifications
- Operating voltage 115 / 230 V (50/60 Hz) ± 10%
- Power consumption ON < 400 VA, standby < 10 VA
- Weight 83 kg
- W x d x h 45 x 60 x 55 cm
- Version 19“ unit, 12 UH
- Temperature range 10 – 35 °C
- Humidity < 80 % non-condensing
- Air pressure 86 – 106 kPa
- Included articles
- Power cord with country plug
- Supply connection 3 cables x 2 m, banana plugs
- User manual with conformity declaration
- Calibration certificate factory calibration
Technical Specifications
- Standards
- IEC61000-4-5, ANSI C62.41, C62.45,
- IEC60060-1, ITU-T K.20, 21, 44,
- IEC61643-1 Part 1/Class III
- Impulse capacitance 10 µF ± 10 %
- Energy at max. voltage 750 joules
- Output impedance 2 Ω ± 10 %
- Adjustable voltage OC 0.4 kV – 12.5 kV ± 10 %
- Calibrated level 1 kV – 12 kV
- Voltage waveform 1.2 µs ± 30 % / 50 µs ± 20 %
- Current SC 0.5 kA – 6.25 kA ± 10 %
- Current waveform 8 µs ± 20 % / 20 µs ± 20 %
- Undershoot < 30 %
- Pulse repetition up to 1 / 5 s @ 1 kV, 1 / 30 s @ 12 kV
- Polarity positive, negative, alternating
- Synchronization 0 – 360°, step 1°
- Programmable ramps voltage, synchronisation angle