EN/IEC 61000-4-18

(Showing 7 of 7)

The EMC shop is an ISO 17025 accredited company with stock on ring wave generators compliant to IEC 61000-4-18 Damped Oscillatory Wave Immunity Test requirements.

  • Haefely

    SKU: sku-526

    Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator

    Burst duration: 2 seconds to continuous
    Burst frequency: 100kHz & 1MHz
    Coupling: Single & Multiple Path
    Mains & EUT Connections: HV connector & CDN
    Polarity: Positive, Negative & Alternating
    Pulse current (short circuit): 16A ac/dc per path
    Pulse repetition: 40 Hz & 400Hz
    Pulse voltage (open circuit): 480Vac (phase - phase) / 110Vdc
    Rise time: 75ns
    Source Impedance: 200 ohms
    Standards Met: IEC 61000-4-12 Power & Data lines;  ANSI C37.90.1-2002 Power lines;  IEC 60255-22-1 Measuring relays and protection equipment; IEEE 1613 Substation Equipment
    Test Voltage: 0.25 – 3.3kV
  • EM Test

    SKU: sku-413

    EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

    Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz
    Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value
    Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%
    Polarity: Positive, negative
    Rise Time: 75ns ± 20%
    Rise Time-2: 5 ns ±30%
    Source Impedance: 50 ohm ±20%
    Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%
    Weight: 32 kg (1-phase) 50 kg (3-phase)
    Slow Damped Oscillatory Waves: As Per EN/IEC 61000-4-18
    Burst Duration: At least 2s
    Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value
    Dimensions: 19" / 9 HU, approx. 19" / 9 HU, approx.
    Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18
    Frequency: 100 kHz ± 10%
    General Data: Technical Details
    Impedance: 12ohm and 30ohm ± 20%
    Oscillation Frequency-2: 100kHz and 1MHz ± 10%
    Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;
    Polarity-2: Positive, negative
    Pulse repetition: 1 to 60 transients per minute
    Repetition Rate: Max. 5,000 /s ±10%
    Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
    Rise time: 0.5 us ± 30%
    Source impedance: 200ohm ± 20%
    Spike frequency: 100kHz ± 10%
    Supply Voltage: 115/230V +10/-15%
    Test Voltage: 250 V - 6,000 V ± 10%
    Voltage-2: Voltage (o.c.) at HV output 250 V - 3,000 V ± 10% Voltage (o.c) at line output 250 V - 2,500 V ± 10%

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.