ISO 11452 Categories
ISO 11452 Test Equipment, Systems & Solutions
-
ISO 11452-2 Full ALSE Test Setup
SKU: 10460
Frequency Range: 80 MHz - 18 GHzTest Severity Levels: 100 V/m Standard (up to 200 V/m Max)Applications: Radiated Immunity Testing, EV & Battery EMC TestingNormative References: ISO 11452-1Inquire for Availability -
3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω
SKU: sku-562
Connector type: N 50 ΩDimensions: 4.30 x 1.5x 1.05 m, .95 m table heightDistance between the plates: 150 mmFrequency range: 0 GHz - 1 GHzMax. input power: 1000 WStandards Met: ISO 11452-5Stripline: Conform with ISO 11452-5Typical impedance: 50 ΩTypical VSWR (30 - 1000 MHz): Better than 1.22 -
ISO 11452-8 Magnetic Field Immunity Test System
SKU: 10463
Frequency Range: 15 Hz to 150 kHz.Normative References: ISO 11452-1, Road vehiclesOptional: Artificial NetworksMagnetic Field Strengths: up to 1,000 A/mInquire for Lead Time -
ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests
SKU: 10462
Test Standards: ISO 11452-5Frequency Range: DC - 1 GHzApplications: Automotive EMC Testing, Electric Vehicle and Battery EMC TestingInquire for Availability -
ISO 11452-3 Transverse Electromagnetic (TEM) Cell Test System
SKU: 10461
Frequency Range: 0.01 MHz to 500 MHzTest Severity Levels: 200 V/m or moreNormative References: ISO 11452-1Automotive EMC Standard: ISO 11452-3Inquire for Lead Time -
ISO 11452-4 Turn Key Solution for Harness Excitation Methods (BCI and TWC)
SKU: 10459
Test Capabilities: RF Conducted ImmunityStandards Met: ISO 11452-4Applications: Automotive Component Disturbance TestingBCI Test Levels (w/ built-in amplifier): 1000mAFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHzTypically In Stock -
FCC F-150-1 7 GHz Bulk Current Injection Probe
SKU: 25366
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 Watts (30 minutes)Test Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: .47" ( 12mm )Frequency Range: 2.3 GHz – 7.0 GHzInsertion Loss: -4 to -6 dBInquire for Availability -
FCC F-150 2.1 GHz Bulk Current Injection Probe
SKU: 25365
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 WattsTest Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: 1.25" ( 32mm )Frequency Range: 800 MHz - 2.1 GHzInsertion Loss: -4 to -6 dBInquire for Availability -
LISN-CISPR25-200 LISN
SKU: LISN-CISPR25-200
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637-2Max EUT DC Voltage: 1,000 VoltsMax EUT Current: 200 AmpsMax EUT AC Voltage (60Hz/400Hz): 700V/300VInductance: 5 µHIN STOCK -
Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More
SKU: sku-253
Weight: Approx. 36kgAmplifiers: low-frequency signal source with amplifierDimensions: 19"/6HU (555mm x 448mm x 286mm)Frequency range: 10Hz - 250kHzGeneral Data: Technical DetailsHarmonic Distortion (THD): less than -20dBc at 100W power 0.5ohmOperating Temperature: 10°C - 40°CSignal current: Max. 15A rmsSignal level: 0.001V - max. 7Vrms (14Vrms)Signal power: 100W (nominal)Supply Voltage: 115V or 230V +10/-15%, 50/60Hz -
EM Test AN 200N100 Single Line Artificial Network
SKU: 10835
Frequency Range: 100 kHz to 150 MHzDC Max. Voltage: 1000 VAC Max. Voltage: 250 V (up to 1 kHz)Max. Operating Current: 100 A continuousMax. Peak Current: 150 AInsertion Loss: < 3 dBTest Standards: CISPR 25, CISPR 16-1-2Additional Test Standards: ISO 7637-2Applications: Automotive, Military and AerospaceInquire for Availability