Clearance

Clearance Test Equipment, Systems & Solutions

• 

  Boonton 4232A 2 Channel RF Power Meter

  SKU: 30075

  Measurement Range: 10 kHz to 100 GHz

  Dynamic Range: 90 dB (sensor dependent)

  Power Measurement Range: -70 dBm to +44 dBm

  Applications: Radiated Immunity, RF Conducted Immunity

  Channels: 2

  Typically in Stock

  View Product Cart

• 

  Compliance West MegaPulse D5-PF IEC 60601 Surge Tester

  SKU: 84852

  Mas Surge Output Voltage: 5.1 kV

  Main Capacitance: 32 uF ±5%

  Inductances: 500uH and 25 mH ±5%

  Main Resistances: 100 Ω, 50 Ω and 400 Ω ±1% non inductive

  Test Standards: IEC 60601-1, IEC 60601-2

  Cost New:

  Was:

  Price Now:

  $950.00

  1 UNIT

  Ordering Options

• 

  Amplifier Research LN1000A Low Noise Preamplifier 10 kHz to 1 GHz

  SKU: 8795

  Frequency Range: 10 kHz to 1 GHz

  Power Output: +11 dBm at less than 1 dB gain compression

  Input for Rated Output: –18 dBm maximum

  Gain: 30 dB minimum

  Gain Flatness: ±1.5 dB

  Connectors: BNC female

  Applications: Radiated Emissions, EMC Precompliance Testing

  Test Standards: CISPR 11, CISPR 32, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $250.00

  Typically In Stock

  Ordering Options

• 

  Rohde & Schwarz OSP130 RF Switch

  SKU: 438

  Rated Frequency: 50 Hz to 60 Hz (± 10 %)

  Rated Voltage: 100 V to 240 V AC (± 10 %)

  Dimensions: 465.3 mm × 108.7 mm × 494.8 mm

  Connectors: USB type A; LAN: Ethernet RJ-45 connector (f), 10/100 Mbit/s; CAN: 9-pin D-Sub connector (m), 512 kbit/s

  Cost New:

  Was:

  Price Now:

  $1,950.00

  In Stock

• 

  RFCP1G EMI Current Probe 10 kHz to 1GHz

  SKU: 12027

  Top Frequency Range: 1 GHz

  Bottom Frequency Range: 10 kHz

  AC Current Handling (DC-400Hz): 200 Amps

  RF Current Handling (CW/Pulse): 40/60 Amps

  Style: Clamp On

  Diameter: 1.25"

  Transfer Impedance: 1 to 5 Ohms

  Test Standards: IEC 61000-4-6, DO-160, MIL-STD-461, ISO 11452-4

  Applications: Conducted Emissions, Radiated Emissions

  Cost New:

  Was:

  Price Now:

  $1,975.00

  In Stock

• 

  Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

  SKU: 11294

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Burst frequency: 0.1 kHz - 1,000 kHz

  Burst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit

  Coupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)

  Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler

  Phase synchronization: Asynchronous/synchronous 0 - 360° ±2°

  Polarity: Positive/Negative

  Pulse amplitude: 200 Volts - 4.5 kV (20 Volt Steps)

  Repetition time: 100ms to 10s

  Test duration: 1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

  Cost New:

  Was:

  Price Now:

  $975.00

  In Stock

  Ordering Options

• 

  R&S HL 562 Double Stacked Log Periodic Antenna

  SKU: 35791

  Nominal frequency range: 80-1700 MHz

  Usable frequency range: 80-2700 MHz

  Max. input power (N-connector): 1 kW (const.) 1.5 kW (intermitt.)

  Max. input power (7/16- Connector): 2 kW (const.) 3 kW (intermitt.)

  Applications: Radiated Immunity Testing

  Test Standards: IEC/EN 61000-4-3, MIL-STD-461 RS103, DO-160 Section 20, SAE J113/4

  Cost New:

  Was:

  Price Now:

  $295.00

  In Stock

  Ordering Options

• 

  Fischer FCC F-120-3 Bulk Injection Current Probe

  SKU: 8386

  Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

  Frequency Range: 10 KHz - 230 MHz

  Accessory: Hard Case

  Cost New:

  Was:

  Price Now:

  $795.00

  In stock

  Ordering Options

• 

  Schwarzbeck UHALP 9108 A Log Periodic Antenna

  SKU: 6000

  Frequency Range: 250 MHz - 2.4 GHz

  Power Handling: 1kW

  Applications: Radiated Immunity Testing

  Connector: N-Type (f)

  Impedance: 50 Ω nominal

  Cost New:

  Was:

  Price Now:

  $300.00

  Typically In Stock

  Ordering Options

• 

  Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

  SKU: 11050

  Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Applications: EMC Surge, CE Marking, Surge Immunity

  Max EUT AC Voltage (W/ Built In CDN): 690 Volts

  Max EUT AC Current (W/ Built In CDN): 32 Amps

  Max EUT DC Voltage (W/ Built In CDN): 270 Volts

  Max EUT DC Current (W/ Built In CDN): 16 Amps

  Combination/Wave Surge Output Capability: 4.4 kV

  External Coupling: Data Lines (Surge), 3PH EUT

  Warranty: 100 Days

  Condition (5-10 Scale): 8

  Equipment Group: Combination Wave Generators

  Test Setup: Surge Immunity Test, Setup, Equipment

  Cost New:

  Was:

  Price Now:

  $5,975.00

  1 System Left

• 

  Keytek (Thermo Fisher) CE Master for EFT, Surge, PQF

  SKU: sku-583

  Immunity Applcations: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

  EMC Standards (Previous Editions): IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Weight: 29kg (64 lbs)

  EFT/Burst Output: 500V - 4.4kV

  Surge Output: 250V - 2.5kV

  Voltage Drops: 70%, 40%

  Cost New:

  Was:

  Price Now:

  $9,750.00

  1 Unit Available

• 

  AE Techron 2110 DC Pulsed Power Supply/Amplifier

  SKU: 9174-1

  Max. Voltage Handling: 195 V

  Max. Current Handling: 112 A

  Gain Linearity: 0.0125%

  Slew Rate, Voltage Mode: 41 V/µs

  Pulse Durations (mS): 500, 100, 10, 170, 25, 4

  Frequency Response: DC - 5 KHz Current Mode (20 kHz Voltage mode)

  1 Left

  View Product View Product