The 5502A Electrical Calibrator addresses common workload test and measurement equipment like 3.5 and 4.5 digit digital multimeters and more. It comes with internal and external protection features that enable you to transport it easily and perform on-site or mobile calibration. The 5502A can also be fully automated with MET/CAL® Plus Calibration Management Software. It is the ideal calibrator for metrology professionals who need a solution for calibrating low-to-medium accuracy electrical instrumentation.
Overview
- Overview
- Specifications
- More Calibration Equipment
NIST and 17025 Certified test equipment
The EMC Shop Rental & Delivery
| Direct volts | 0 to ± 1020 V |
| Direct current | 0 to 20.5 A |
| Alternating volts | 1 mV to 1020 V 10 Hz to 500 kHz |
| Volt*Hertz | 1000 V@ 10 kHz/330 V@100 kHz |
| Alternating current | 29 μA to 20.5 A 10 Hz to 30 kHz |
| Waveforms | Sine, square, triangle, truncated sine |
| Resistance | 0 Ω to 1100 MΩ |
| Capacitance | 220 pF to 110 mF |
| Power (phantom loads) | 20.9 kW |
| Phase control | 0.01° |
| Thermocouple (source and measure temperature) | B, C, E, J, K L N R, S, T, U 10 μV/°C and 1 mV/degC |
| RTD (source temperature) | Pt 385-100 Ω, Pt 3926-100 Ω Pt 3916-100 Ω, Pt 385-200 Ω, Pt 385-500 Ω, Pt385 1000 Ω, PtNi 385-120 Ω, (Ni120), Cu 427 10 Ω |
| Interfaces | RS-232, IEEE 488 |
| Frequency uncertainty | <25 ppm |
| Oscilloscope calibrator (optional) | Leveled sine wave from 5 mV to 5.5 Vpp max, frequencies 50 kHz to 600 kHz; edge rise times of < 300 ps, multiple trigger functions, lowest dc, square wave and timing uncertainty |
| Current boost transconductance amplifier | 0 to 100 A dc, 0 to 120 A ac, dc to 10 kHz, up to 6000 A with accessory current coils |
| Calibration Documentation | 17025 accredited report of calibration included |
