CISPR 15

(Showing 12 of 17)

EMC testing equipment to certify and comply to CISPR 15: Measurement of Radio Disturbance Characteristics of Electrical Lighting. The EMC shop is the only online store for electromagnetic compliance test equipment.

Show 12
  • Teseq

    SKU: sku-2093

    Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

    Weight: 6.5 kg
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 32 Amps Maximum
    Decoupling of Common Mode Disturbance: Greater than 30 dB
    Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
    Insertion Loss: Greater than 0.1 dB
    Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
    RF Connector: BNC, 50 Ω
    RF Input Voltage: Less than 30 V
    Standards Met: IEC 61000-4-6
    Voltage Division Factor: 10 dB +3 dB / -1 dB
  • Teseq

    SKU: sku-827

    Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

    Weight: 3.3 Lbs (1.5 kg)
    Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 16 Amps
    Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
    Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
    Frequency Range: 150 kHz to 230 MHz
    Insertion Loss: Less than 0.1 dB
    Mains & EUT Connections: 4 mm banana
    RF Connector: BNC 50 Ω
    RF Input Voltage: 30 Volts (Max)
    Standards Met: IEC/EN 61000-4-6
    Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
    Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
    $195.00
    Typically In Stock
  • SKU: sku-399

    Dressler S1 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz

    Weight: 1.9 Lbs (0.86 kg)
    Application/Test Type: For coupling and decoupling of interference signals on screened lines
    Current Rating: 1.5 Amps
    Dimensions: 7.25 x 4.25 x 5.75 (inches)
    Frequency Range: 150 kHz to 230 MHz
    Mains & EUT Connections: BNC
    Standards Met: IEC/EN 61000-4-6
    Voltage Rating: 100 V
  • Teseq

    SKU: sku-318

    Monthly Rental Teseq (Schaffner) CDN T002 Coupling Network for Unshielded Balanced Pairs

    Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
    Current Rating: 1.5 Amps (3/5 Amp models available)
    Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)
    Mains & EUT Connections: Banana, XLR, RJ45, RJ11
    RF Connector: BNC, 50 Ω
    RF Input Voltage: 30 Volts Max
    Standards Met: IEC 61000-4-6
    Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
    $99.00
  • EM Test

    SKU: sku-232

    EM Test (Lüthi) CDN T-Type Coupling/Decoupling Network for Unshielded Lines

    Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
    Current Rating: 1.5 Amps (3/5 Amp models available)
    Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)
    Mains & EUT Connections: Banana, XLR, RJ45, RJ11
    RF Connector: BNC, 50 Ω
    RF Input Voltage: 30 Volts Max
    Standards Met: IEC 61000-4-6
    Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
  • EM Test

    SKU: sku-231

    EM Test (Lüthi) AF-Type Coupling/Decoupling Network for Unscreened/Unsymmetrical Lines

    Application/Test Type: Immunity test to conducted disturbances, induced by radio-frequency fields according to the standards
    Current Rating: 1.5 Amps (Optional 3 Amps)
    Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
    Mains & EUT Connections: 4 mm banana or D-Sub 15/25 pins
    RF Connector: BNC 50 Ω
    RF Input Voltage: 30 Volts Max
    Standards Met: IEC 61000-4-6, CISPR 15, IEC/EN 60945, EN 55015
    Voltage Rating: AC max. voltage (line to ground): 63V - 250V; DC max. voltage (line to ground): 100V - 250V;
  • Teseq

    SKU: sku-230

    Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

    Weight: 1.5 kg (3.3 lbs)
    Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
    Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
    Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
    Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
    Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
    Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
    RF Connector: BNC 50 Ω
    RF Input Voltage: 30 Volts Max
    Standards Met: IEC 61000-4-6, CISPR 15
    Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
    Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
  • Teseq

    SKU: sku-228

    Teseq CDN T Series Coupling Network for Unscreened Communication/Data Lines

    Weight: 0.5 kg (1.1 LB.'s)
    Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD
    Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω; 80 MHz to (230) 300 MHz: 150 Ω +60 Ω / -60 Ω
    Current Rating: 400 mA (line), 800 mA (pair)
    Decoupling of Common Mode Disturbance: 10 kHz: Over 20 dB; 1.5 MHz / 30 MHz: Over 55 dB; 80 MHz: Over 45 dB; 230 MHz: Over 35 dB;
    Dimensions: 4.1 x 2.5 x 4.3 inches (10.5 cm x 6.5 cm x 11.0 cm)
    Frequency Range: 150 kHz to 80 MHz (Optional 10 kHz - 230/300 MHz)
    Mains & EUT Connections: D-Sub adapter to RJ45 / RJ11 (1 mm banana on certain 10 kHz models)
    RF Connector: BNC, 50 Ω
    RF Input Voltage: 20 Volts Max
    Standards Met: IEC 61000-4-6
    Voltage Division Factor: 9.5 dB ±1 dB (10 kHz to 230 MHz: 10 dB ±1 dB)
    Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s
  • Teseq

    SKU: sku-227

    Teseq CDN M5 5-Line Coupling Network for AC Power Lines, 16-32 Amps

    Weight: 6.5 kg (14.3 LB.'s)
    Application/Test Type: 5 mains AC power lines emissions testing up to 32 Amps (3L+N+PE)
    Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
    Current Rating: 32 Amps Maximum
    Decoupling of Common Mode Disturbance: Greater than 30 dB
    Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
    Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
    Insertion Loss: Greater than 0.1 dB
    Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
    RF Connector: BNC, 50 Ω
    RF Input Voltage: Less than 30 V
    Standards Met: IEC 61000-4-6
    Voltage Division Factor: 10 dB +3 dB / -1 dB
    Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.