Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System

  SKU: 11156

  Phase synchronization: 3

  Voltage Rating: 45 kv

  Dual Range VAC: 150 V and 300 V

  Dual Range VDC: 200 V and 400 V

  Weight: 522 kg

  Frequency Range: 16 Hz – 819 Hz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq NSG 4070B Conducted & Radiated Immunity Test System

  SKU: 11159

  1 review

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): None

  BCI Test Levels (w/ built-in amplifier): None

  Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3ctest TSS-2430 Vehicle Mounted Multimedia Voltage Disturbance Simulation Generator

  SKU: sku-1688

  Test Standards: VW 80972

  Applications: Automotive EMC Testing

  Inquire

  VIEW PRODUCT Cart

• 

  Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: 10161

  Weight: 550 grams (1800 grams with storage case)

  Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines

  Common Mode Impedance: 150 Ω ±20 Ω

  Current Rating: 600 mA (line), 1200 mA (pair)

  Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB

  Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)

  Frequency Range: 150 kHz to 30 MHz

  Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.

  RF Connector: BNC 50 Ω

  RF Input Voltage: 15 V max

  Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4

  Voltage Division Factor: 10 dB ±1 dB

  Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds

  T

  VIEW PRODUCT Cart

• 

  PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

  SKU: 10057

  Weight: 50 kg (110 pounds)

  Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

  Current Rating: 63 Amps Max

  Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 63 A IEC connector

  RF Connector: BNC (f)

  Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

  Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)

  CISPR 16-1-2: Yes

  DO-160F: Yes

  CISPR 22: Yes

  FCC: Yes

  ANSI C63.4: Yes

  VIEW PRODUCT Cart

• 

  Schwarzbeck NNHV 8123-200 CISPR25 Artificial Mains Network (AMN)

  SKU: 21156

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: CISPR 25, MIL-STD-461, ISO 7637

  Max EUT DC Voltage: 1,000 Volts

  Max EUT Current: 200 Amps

  Max EUT AC Voltage (60Hz/400Hz): 400V/300V

  Inductance: 5 µH

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

  SKU: sku-798

  Weight: Approx 44 kg (97 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Dimensions: 19 inch/6u

  Impedance: 2 Ohm

  Phase synchronization: 0°-360°, 1°step or random

  Polarity: Positive, Negative, Alternate

  Pulse current (short circuit): 0.1kA-5kA ±10%

  Pulse voltage (open circuit): 0.2kV - 10kV ±10%

  Standards Met: IEC 61000-4-5

  VIEW PRODUCT Cart

• 

  Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing

  SKU: 30082

  Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)

  Frequency Resolution: 0.01 Hz

  Frequency Counter Resolution: 0.1 Hz to 10 kHz

  Test Standards: CISPR 16-1-1, MIL-STD-461

  Applications: Conducted Emissions, Radiated Emissions

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Schwarzbeck FSH3D Isotropic 3-Axial RX Loop Antenna

  SKU: FSH3D

  Frequency Range: 9 kHz - 200 MHz (nominal)

  Connector: N-female 50 Ω

  Power Supply: 5 V DC < 100 mA

  Power Supply and Logical Connector: Binder 99-0421-10-07 Serie 712

  VSWR: typ. < 1.5 (20 kHz - 50 MHz)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EMCO 3825/2 LISN 9kHz - 100 MHz for CISPR / 1PH

  SKU: 30021

  Frequency Range: 9 kHz - 100 MHz

  Power Source Frequency: DC - 60 Hz

  Maximum Current: 25 A

  Maximum Voltage: 400 VAC Line - Line; 220 VAC Line to Ground

  Network Inductance Impedance: 50/250 µH, 50 Ω

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  RFCP20M EMI Current Probe 20Hz to 20 MHz

  SKU: 2135

  Top Frequency Range: 20 MHz

  Bottom Frequency Range: 20 Hz

  AC Current Handling (DC-400Hz): 300 Amps

  RF Current Handling (CW/Pulse): 150/200 Amps

  Style: Clamp On

  Diameter: 1.25"

  Transfer Impedance: .025 Ohm

  Test Standards: MIL 461 CE101 and other Conducted Emissions Standards"

  SHIPS IN 3-5 DAYS

  VIEW PRODUCT Cart

• 

  RFCP30M Current Monitor for MIL-STD Conducted Emissions Testing

  SKU: sku-2074

  Top Frequency Range: 30 MHz

  Bottom Frequency Range: 10 kHz

  AC Current Handling (DC-400Hz): 200 Amps

  RF Current Handling (CW/Pulse): 60 Amps

  Style: Clamp On (Fixed Window)

  Diameter: 4.5"

  Transfer Impedance: 1-5 Ohm

  Test Standards: MIL 461 CE102

  VIEW PRODUCT Cart