Browse Equipment by Test Application

Test Applications Categories

RF Interference Analyzers & Scanners

Lightning Induced Transient Susceptibility Testing

Tempest Testing

Safety/Compliance

Battery Testing Equipment

Spectrum Analyzers for EMC Testing

Test Applications Test Equipment, Systems & Solutions

LISN-CISPR25-800 Artificial Mains Network (AMN) for Electric Vehicles

SKU: 22141

EUT Current Handling: 800 Amps

EUT Voltage Handling: 1,000 Volts DC (400V 50/60Hz, 300V 400 Hz)

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Test Standards: CISPR 25, MIL-STD-461, ISO 21498-2, ISO 11452-4, DO-160, DEF-STAN-59, ECE R10

Additional Test Standards: ISO 7637-2, ISO 7637-4,

Inductance: 5 µH

2-4 WEEKS

VIEW PRODUCT Cart
Amplifier Research FA7040/Kit Electric Field Analyzer

SKU: sku-1755

Test Standards: IEC 61000-4-3

Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms

Frequency Range: 2 MHz - 40 GHz

Typically In Stock

VIEW PRODUCT Cart
EM Test PFS 200N Automotive Power Fail Simulator

SKU: 21186

Standards Met: ISO 16750-2

OEM Standards Met: BMW GS 95003-2, Fiat 9.90110, Ford EMC-CS-2009.1, GMW 3172, Hyundai Kia ES, IVECO 16-2103, Mack Trucks 606GS15, Mitsubishi ES-X82010, PSA B21 7110, Volvo STD 515-003, Ford FMC 1278, BMW GS 95024-2-2, Jaguar JLR-EMC-CS, Tesla TS-0000425-05

Max EUT DC Voltage (W/ Built In CDN): 80 Volts

Max EUT DC Current (W/ Built In CDN): 30 Amps

Peak Inrush Current Capability: 70 Amps

Typically in Stock

VIEW PRODUCT Cart
3ctest APS 40C10 DC Transient Pulse Simulator for Automotive ISO 7637-2 Pulse 2B/4

SKU: sku-867

Weight: 35 Lbs

Dimensions: 19" 4U Chassis

Output: Single polarity output: 0~40V

Rise time: 10us(resistive load)

Source Impedance: 10mΩ

VIEW PRODUCT
EM Test MPG 200 Automotive Micropulse Generator up to 1.1 kV, built in CDN 60V/25A DC

SKU: 11818

Applications: Automotive Electrical Disturbances, EV EMC Testing

Standards Met: ISO 7637

Max EUT DC Voltage (w/ Built In CDN): 60 Volts

Max EUT DC Current (w/ Built In CDN): 25 Amps

Peak Inrush Current Capability: 50 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1 and 6) "Output=DUT supply +/- Safety laboratory connectors Coupling To the battery +line Decoupling Via diode and battery supply switch DUT supply Max. 60V/25A"

Input: 115/230V +10/-15%

Repetition rate: 300us ± 10% (10 - 10%)

Test voltage: Test Voltage up to 1,100V and GOST PULSE 1B (24V), ISO PULSE 6 (12V/24V)

Cost New:

Was:

Price Now:

$875.00 - $4,500.00

In Stock

ORDERING OPTIONS
Fischer Custom Communications FCC-LISN-5-50-2-01-DO-160F, 5 uH, 50 Amp, 2 Line LISN for DO-160F

SKU: 10736

Application/Test Type: DO-160F Tests

Current Rating: 50 Amperes

Frequency Range: 50 - 800Hz

Inductors: 5 µH

Mains & EUT Connections: Multi-Contact Safety Socket

RF Connector: Multi-Contact Safety Socket

Standards Met: DO-160F

Voltage Rating: DC -1200V 60Hz - 800V 400Hz - 400V 800Hz - 230V

Inquire for Availability

VIEW PRODUCT Cart
Teseq PA 5740 Power Amplifier/Battery Simulator for ISO 7637

SKU: 10491

Standards Met: ISO 7637-2, ISO 16750-2

Applications: Automotive EMC Testing, Electric Vehicle Compliance Testing

Bandwidth: up to 180 kHz

Inquire for Availability

VIEW PRODUCT Cart
EM Test CN 200N1 Audio Transformer Assembly for LF Conducted Immunity Testing

SKU: sku-481

VIEW PRODUCT Cart
EM Test AMP 200N Low Frequency Signal Source DC (0Hz) to 250kHz

SKU: sku-480

Weight: Approx. 18kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19", 3HU (500mm x 449mm x 133mm)

Frequency range: DC - 250kHz

General Data: Technical Details

Harmonic Distortion (THD): less than 0.1%

Operating Temperature: 10°C - 40°C

Output current: Max. 5Arms up to 200kHz Max. 4Arms 200kHz - 250kHz

Output Impedance: 30 mOhm @ 1 kHz

Output voltage: 50Vrms, max. 140V(p-p) up to 100kHz 30Vrms 100kHz - 250kHz

Protection: - Short circuit - Overtemperature

Signal power: 250W (nominal)

Supply Voltage: 115 V +10/-02%, 50/60 Hz or 230 V +10/-15%, 50/60 Hz

VIEW PRODUCT Cart
EM Test VDS 200Q Four Quadrant Battery Supply Simulator and DC Voltage Source

SKU: sku-478

VIEW PRODUCT Cart
EM Test AutoWave for Generating and Recording Automotive Waveforms

SKU: sku-477

Weight: 6kg

Dimensions: 100mm x 380mm x 390mm

Frequency range: DC - 50kHz

General Data: Technical Details

Output: 2 channels; 2 additional output channels can be added as an option (ExtBoard)

Resolution: 16 Bit

Supply Voltage: AC: 90V - 250V, 47Hz - 63Hz

Voltage: 10V, unipolar or bipolar

VIEW PRODUCT Cart
Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz

SKU: sku-278

Weight: 150 g (5.3 oz)

Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

Battery: N/A

Communication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

Digital Filtering: N/A

Dimensions: 65 mm (2.55 in)

Dynamic Range: 1 to 1,000 Volts per Meter (Single Range)

Flatness: Frequency correction OFF: ±1.0 dB @ 10 MHz Frequency correction ON: typically 0.8 dB, 5 kHz–1 GHz 1.4 dB, 1 GHz–18 GHz

Frequency Range: 3 MHz to 18 GHz

Internal Data Memory: None

Measurement Mode: X-Y-Z and Composite

Operation Time: Laser Powered - Seemless

Overload: 1,600 V/m CW 16,000 V/m Peak

PC Software: Optional Software for setup, automation and monitoring available.

Recharging Time: N/A

Resolution: 0.01 V/m

RF Field Probes: E-Field

Sampling Rate: 20 msec/up to 50 samples per second, USB and GPIB only

Sensors: Three monopoles

Standards Met: IEC/EN 61000-4-3

Temperature Reading Resolution: None

VIEW PRODUCT Cart

Test Applications

RENTALS ARE FAST & EASY

Test Applications Categories

Test Applications Test Equipment, Systems & Solutions