Com-Power PA-102 Preamplifier 1-1000MHz 32dB Gain

Com-Power PA-102 Preamplifier 1-1000MHz 32dB Gain

Frequency Capabilities:
1 MHz to 1000 MHz
Gain:
32 dB
Input:
50 Ohms
Output:
50 Ohms
Manufacturer:
Com-Power
Online Orders Ship Same Day

 

SKU:
sku-348

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

  • The Com-Power PA-102 will allow you to amplify the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured
  • Designed to withstand years of punishment in any laboratory environment. It is constructed from rugged, high-quality aluminum, with an external powder coat
  • Input/Output - 50 Ohms

Key Considerations

Manufacturer:
Com-Power
Frequency Capabilities:
1 MHz to 1000 MHz
Gain:
32 dB
Input:
50 Ohms
Output:
50 Ohms

Related EMC Equipment & Solutions

Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

SKU: sku-216

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector: 50Ω N-Type (f)
Dimensions: 7.5 x 5 x 3 inches
Frequency Range: 1 GHz - 6 GHz
Gain: 30 dB typical (± 1.5 dB flatness)
Input: 10 VDC, 2 dBm
Maximum Continuous Power: +13 dBm @ 1 dB compression
VSWR: 2.1:1 Input/1.8:1 Output
View Product Cart
Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

SKU: sku-367

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Battery: Battery Pack: Two 6 V, 0.7 A NimH
Connector: BNC (f)
Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
Flatness: (+/-) 2 dB
Frequency Range: 100 Hz - 30 MHz
Gain: 28 dB
Impedance: 50 Ohms
Input: Max. DC Input 10 VDC, 2 dBm Input Power 12 VDC, 500 mA
View Product Cart
Com-Power PAM-118A High Gain EMC Broadband Preamplifier

Com-Power PAM-118A High Gain EMC Broadband Preamplifier

SKU: 10217

Weight: 2.5 lbs (1.1 3Kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector: 50Ω Precision N-type (female)
Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)
Frequency Range: 500 MHz - 18 GHz
Gain: 40 dB typical (± 2.5 dB flatness)
Input: 15 VDC, 500 mA
Maximum Continuous Power: +102dBm @ 1 dB compression
RF Input Voltage: 0 Vdc (max)
VSWR: 2.2:1 maximum
Inquire for Availability
View Product Cart
Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

SKU: sku-368

Weight: 1 lb. (0.45 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Dimensions: 83 x 42 x 25 mm (3.27 " x 1.65" x 0.985")
Flatness: ± 2 dB
Frequency Range: 10 MHz - 1000 MHz
Gain: 21 dB
Input: Max Input: 2 VDC, +10 dBm
Maximum Continuous Power: 6 VDC, 0.5 A
View Product Cart
Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

SKU: 10214

Weight: 2.5 lbs (1.1 3Kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector: 50Ω 2.9mm female
Dimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)
Frequency Range: 18 GHz - 40 GHz
Gain: 42 dB typical (± 2 dB flatness)
Input: +15Vdc, 500 mA
Maximum Continuous Power: +10 dBm @ 1 dB compression
VSWR: 2.25:1 maximum
Inquire for Availability
View Product Cart
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

SKU: 10215

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector: 50Ω N-Type (f)
Dimensions: 7.5 x 5 x 3 inches
Frequency Range: 1 MHz - 1000 MHz
Gain: 33 dB typical (± 3 dB flatness)
Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power: +4 dBm @ 1 dB compression
VSWR: 1.3:1
Inquire for Availability
View Product Cart
Com-Power AH-640 Standard Gain Horn Antenna 26.5 to 40 GHz

Com-Power AH-640 Standard Gain Horn Antenna 26.5 to 40 GHz

SKU: sku-360

Weight: 1 lb. [0.5 kg]
Antenna Factor (1 Meter): 36.8 to 39.6 (average: 37.9) [dB(m-1)]
Antennas: Double Ridge Guide Horn Antenna
Connector: 2.92 mm [K-type] (female)
Dimensions: Horn/Waveguide Dimensions: 2.4” x 3.1” x 6.6”[6.1 x 7.9 x 16.8 cm] Complete Assembly Dimensions: 5.9” x 8.7” x 9.3”[15 x 22 x 23.5 cm]
Frequency Range: 26.5 GHz to 40 GHz
Gain: 21.6 to 23.1 (average: 22.6) dBi
Impedance: 50 Ohms
Maximum Continuous Power: 10W/200W [with/without] waveguide to coaxial adapter
VSWR: 1.17 to 1.94 (average: 1.58) :1
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form