Amplifier Research

(Showing 12 of 65)

EQUIPMENT STOCKED FROM AMPLIFIER RESEARCH

The EMC Shop has the largest rental inventory of AR amps, antennas, field probes and radiated immunity test systems. Contact us for rentals, repairs, calibrations or refurbishment services.

Amplifier Research EMC test equipment in stock. Rentals ship same day

Amplifier Research is now part of Ametek CTS, who launched acquiring solid state amplifier manufacturer Milmega and TWT amplifier manufacturer Instruments for Industry but have since disolved them. The EMC Shop will work on some amplifiers depending on age and issue.

OTHER AMETEK CTS PRODUCT LINES

RESOURCES

AMPLIFIER RESEARCH EMCWARE SOFTWARE

Show 12 24 36 48

Amplifier Research Categories

Amplifier Research RF Power Amplifiers
Amplifier Research RF Power Amplifiers
AR Electric Field Probes
AR Electric Field Probes
AR EMC Antennas
AR EMC Antennas
AR Immunity Systems
AR Immunity Systems

Amplifier Research Test Equipment, Systems & Solutions

  • Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    SKU: sku-914

    Dimensions: 420 x 85 x 65 mm including base and probe head.
    Weight: 350g Approximately
    Battery: Standard recharger included, 3 hour charge time.
    Damage Level: 1600 V/m CW and 16,000 V/m peak
    Data Transfer Rate: 30 samples per second
    Dimensions-2: 420 x 85 x 65 mm
    Operating Temperature: 0 to 50°C
    Power Requirements: 2 built-in NiMH batteries, size AA, Rechargeable, changed by operator, 40 hours operating life per charge.
    Probe Head Diameter: 65mm
    Probe Sampling Rate: 60Hz, 50Hz, 5 Hz- user selectable
    Ranges: Single continuous range
    Sensitivity: 0.6–1000 V/m
    View Product Cart
  • Amplifier Research PM2003 Power Meter, 3 Channel, 10 kHz - 40 GHz, -70dBm to +44dBm

    Amplifier Research PM2003 Power Meter, 3 Channel, 10 kHz - 40 GHz, -70dBm to +44dBm

    SKU: sku-805

    Weight: 7 lbs (3.2 kg)
    Dimensions: 8.25 in (21.0 cm) wide, 3.5 in (8.9 cm) high, 13.25 in (33.7 cm) deep
    RF Field Probe Connector: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.
    RF Field Probe Frequency Range: 10 kHz-40 GHz, power head dependent
    RF Field Probe Maximum Input Power: May be operated into 1kW or 1V fs
    RF Field Probe Power Measurement Range: -70dBm to +44dBm, power head dependent
    View Product Cart
  • A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    SKU: sku-775

    Weight: 150 lbs
    Dimensions: 19.8 x 16.8 x 21.7 in
    Flatness: .± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz
    Gain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum
    Impedance: 50 ohms
    Input: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical
    Output: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Availability
    View Product Cart
  • A.R. 3500A100 RF Amplifier for RS103 Testing up to 100 MHz

    A.R. 3500A100 High Power RF Amplifier

    SKU: sku-741

    Weight: 900 lbs.
    Dimensions: 22.1 x 60.0 x 39.4 in
    Flatness: ± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz instantaneously
    Gain: 66 dB minimum
    Impedance: 50 ohms
    Input: 180-267 VAC Delta (4 wire) 360-435 VAC, Wye (5 wire) (user must specify) 47-63Hz, 3 phase 15,000 watts maximum at .99 P.F. typical
    Output: POWER OUTPUT @ 3 dB COMPRESSION Typical.... 3000 watts Minimum .. 2700 watts POWER OUTPUT @ 1 dB COMPRESSION Typical...... 2500 watts Minimum ... 2000 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Lead time
    View Product Cart
  • Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

    Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

    SKU: 11650

    Weight: 350g approx
    Application/Test Type: electric field measurement instrument for use in EMC and EMI applications
    Battery: 2 built-in NiMH batteries, size AA, rechargeable, changed by operator, 40 hours operating life per charge.
    Communication: 10 m glass cable
    Dimensions: Approx. 420 x 85 x 65 mm including base and probe
    Frequency Range: 27MHz–60GHz
    Measurement Mode: composite values
    Operation Time: 40 hours operating life per charge.
    Recharging Time: Standard recharger included, 3 hour charge time
    RF Field Probes: E-Field
    Sampling Rate: 60Hz, 50Hz, 5 Hz. - user selectable
    Sensors: Isotropic
    View Product Cart
  • Used Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

    Used Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

    SKU: sku-529

    Weight: 35 LBs
    Dimensions: 19.8 x 6.1 x 11.80 in
    Flatness: ± 1.5 dB
    Frequency Range: 10 kHz - 250 MHz instantaneously
    Gain: High Range: 61 dB; Low Range: 47 dB
    Impedance: 50 ohms
    Input: 90-135/180-270 VAC 47 to 63 Hz, single phase 200 watts maximum
    Output: Power output @ 3dB compression Nominal 32 watts Minimum 25 watts Power output @ 1 dB compression Nominal 20 watts Minimum 15 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form