Overview
3ctest PFS series single/ three-phase power fail simulator simulates voltage dip, interruption and variation which are caused by power grid and transformer devices due to malfunction or sudden large change of load. It is required to test this kind of phenomena to check whether electronic and electrical device can sustain safety operating condition. PFS series single/ three-phase power fail simulator is equipped with controllable semi-conductor switches with protection function as per IEC 61000-4-11/34?GB/T17626.11/34.
| General Data | |
| Display | 5.7 inch TFT touch screen |
| Power supply | 110V or 220V?±10%?50/60Hz?default AC 220V, 50Hz? |
| Fuse | 6A |
| Max. Power consumption | 300W |
| Memory space | Infinite ?PC? |
| Communication mode | Ethernet LAN?RJ45 |
| Auxiliary interface | D-sub 25p |
| External trigger input | BNC,5V TTL |
| CRO output | BNC,5V TTL |
| Input | BNC,5V TTL |
| Synchronization | 45-65Hz, 20-500V between dotted terminal & undotted terminal 0-500V among dotted terminal, undotted terminal and case |
| Warning LED | 0-220VAC 10A/0-48VDC 3A Depending on external signal lamp |
| Safety circuit | Test only can be started when it is closed |
| Failure test | Display on LCD and interrupt the work at failure case |
| Working indicator | LED, LCD front panel display |
| Grounding connection | Flat ground line |
| EUT power injection | 5-core industrial plug |
| Output mode | Standard 1m coaxial cable |
| Size | 19 inch 6U or 22U/35U cabinet |
| Weight | Approx. 35Kg-150Kg |
| Temperature | 15–35? |
| Humidity | 45%–75% |
| Air pressure | 86kPa–106kPa |
| Power fail test as per IEC 61000 - 4 – 11 & IEC 61000-4-34 for single/three phase AC including voltage dips, short interruption and variation | |
| Technical Parameters | |
| EUT max. Continuous current | 12A (PFSxx10xxx series) 18A (PFSxx16xxx series) 33A (PFSxx30xxx series) 55A (PFSxx50xxx series) 110A (PFSxx100xxx series) 220A (PFSxx200xxx series) |
| Withstand impulse current | Product’s current no more than 50A: 500A, more than 50A: 1000A |
| Protection | Internal over current, short circuit, over voltage, over heat, surge, burst, ESD protection Optional external accessories for Line in, Line out port |
| EUT max. Input voltage | Single phase 250VAC±5%, 50/60Hz±5%(300VDC optional) Three-phase : PFS38xxxx series: 420VAC, 50/60Hz±5%(300VDC optional) PFS45xxxx series: 480VAC, 50/60Hz±5%(300VDC optional) PFS69xxxx series: 720VAC, 50/60Hz±5%(300VDC optional) |
| EUT current and voltage measurement | LCD display |
| Interruption level | 0% |
| Voltage interruption mode | Optional one phase, two-phase or three-phase |
| Dip level | 0%-100% |
| Voltage dip mode | Line to neutral Line to line PFSxxxxT1?GB/T17626.34 picture 3a, b/IEC61000-4-34:Figure3a?3b PFSxxxxT3?GB/T17626.34picture 3a, c/IEC61000-4-34:Figure3a?3c |
| Repetition rate | 0.3-9999 cycle or 5ms-9999ms |
| Duration | 5ms-9999ms |
| Test time | 1s-9999s |
| Rise and fall time | Product’s current no more than 75A: 1-5us( standard resistance calibration) More than 75A: 1-50us(standard resistance calibration) |
| Voltage variation level (for no more than 16A) | 0-100% |
| Time for decreasing voltage (for no more than 16A) | 500ms-9999ms?50%-100%?or 1-5us?100 ohm load? 1000ms-9999ms?0%-100%?or 1-5us?100 ohm load? |
| Time for increasing voltage (for no more than 16A) | 500ms-9999ms?50%-100%? 1000ms-9999ms?0%-100%? |
| Time for reduced voltage (for no more than 16A) | 10ms-99999ms |
| Synchronization | 0°- 360°, 1° step or random |
| Trigger mode | Automatic, manual, or external |
| Load Capacity | |
| Peak Impulse Capacity | |
| Rated current | Withstand impulse current capacity |
| Current no more than 50A | 500A |
| 50.1A?100A current | 1000A |
| Current more than 100A | More than 1000A |
| Simulator with rated current no more than 16A meets the load capacity specified in IEC 61000-4-11 | |
| Rated current | Load current capacity |
| PFS 3810T1 PFS 3810T3V | 12A AC/DC continuous current; 15A continuous 5s; 25A continuous 3s; |
| PFS 3816T1 PFS 3816T3V | 18A AC/DC continuous current ; 23A continuous 5s; 40A continuous 3s; |
| Standard Accessories | |
| PFS test system, power cable, EUT supply cable, internet cable, factory test report, user manual | |
