EM Test LD 200 S19 Load Dump Generator

Condition:
Used
Manufacturer:
EM Test
  • Designed For Automotive Load Dump Simulation
  • Simulates Transient Voltage Conditions
  • Ideal For Automotive EMC and Electrical Testing
  • Supports Repeatable And Controlled Test Conditions
  • Suitable For ECU And Power System Validation

 

No reviews yet Write a Review
Availability:

In Stock

SKU:
10131

 

 

Due to tariff increases, some items in our catalog are subject to additional costs when purchased.


Getting Started...

Check out our Google Reviews

Overview

The EM Test LD 200 S19 is usable for precompliance testing to ISO 16750-2, ISO 11498-2 and other automotive standards to determine a products vulnerability to electrical transients and events.

Specifications
Load Dump Test 1
Output Voltage 80 V ±2 V
Open Circuit 80 V ±2 V
Rise Time tr <10 µs
Pulse Duration at t 52 µs ±5 µs
Output Resistor 2.5 Ω
Polarity Positive
Repetition Time 1 Pulse Each 5 min
Test Time 10 min
Coupling Superimposed to the battery supply line
Set-up As per fig. 8 / 5.5.3
 
Load Dump Test 2 – Giant Pulse
Output Voltage 50 V ±2 V
Open Circuit 80 V ±2 V
Open Circuit 110 V ±2 V
Rise Time tr <1 ms
Pulse Duration at t 188 ms ±4 ms
Output Resistor 2.5 Ω
Polarity Positive
Repetition Time 1 Pulse Each Minute
Coupling Superimposed to the battery supply line
Set-up As per fig. 10 / 5.5.4
 
Load Dump Test 3
Output Voltage High Repetitive Load Dump as per 5.5.5
Open Circuit 80 V ±2 V
Rise Time tr <10 µs
Pulse Duration at t 52 µs ±5 µs
Output Resistor 2.5 Ω
Polarity Positive
Repetition Time 1 Pulse Each 5 min
External DC Source Available at Customer Site, Max 30 V Out
Positive Pole Surge +30 V / 0 V / -1 V
Duration 300 ms
Repetition Time 1 Pulse Each Minute
Control By LD 200 S19
Coupling Superimposed to the battery supply line
Set-up As per fig. 12 / 5.5.5
 
Trigger
Automatic Automatic Pulse Release
Counter 1 - 1,000,000
Coupling
Battery Supply Max. 60 V / 50 A With 100 A Inrush Current
External DC Source or Battery is Requested
Superimposed + Line
Decoupled By Diode Network
 
Test Routines
Standard Test Routines Load Dump Test 1 as per Toyota TSC7001G
Load Dump Test 2 as per Toyota TSC7001G
Load Dump Test 3 as per Toyota TSC7001G
 
Service
Service Service, Setup, Self Test
 
Interface
Serial Interface RS 232, Baud Rate 1200 - 19200
Parallel Interface IEEE 488, Address 1 - 30
 
Safety
Safety Circuit Control Input (24 VDC)
Warning Lamp Floating Output Contact
 
General Data
Dimensions 19" / 6HU, Approx. 18 kg
Supply Voltage 115 / 230 V +10 / -15%
Fuses 2 x 1AT

Key Considerations

Manufacturer:
EM Test

Downloads