EMC Test Systems

EMC Test Systems Test Equipment, Systems & Solutions

• 

  Rent 30 V/m Radiated Immunity Test System for IEC 61000-4-3

  SKU: 0607

  RF Enclosures Available: EMI Tents, GTEM's, Open TEMs, Anechoic Chambers, Absorber Panels

  Distances: 3 meter typical (1 to 10 meters available)

  Software: AR's EMC Ware (typically)

  Application: Radiated Immunity Testing

  Add Ons: Turntables, EMI Hardened Cameras and More

  Shipping: Configuration & Prep can be as fast as 1-2 business days

  Generic Standardds: IEC 61000-6-1, IEC 61000-6-2

  In Stock

  View Product Cart

• 

  Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides

  SKU: sku-393

  Application/Test Type: IEC 61000-4-20

  Frequency Range: 30 to 1000 MHz

  Max Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*

  Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  View Product Cart

• 

  Com-Power PC-114 EMC Pre-Compliance Emissions Test System 9 KHz - 1 GHz

  SKU: sku-392

  View Product Cart

• 

  3ctest LSS 160SS Single Stroke Test System for DO-160 Section 22 Pulses 1, 4, 5A, 5B

  SKU: 22328

  Impedance: 1Ω, 5Ω

  Output: single stroke

  Peak current: 1600A

  Polarity: +/-

  Supply Voltage: AC220V single phase 10A

  6-8 Months

  View Product Cart

• 

  3ctest CCS 600 Conducted Immunity Test System

  SKU: 10327

  Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

  Built in CDN: 250 Volts/20 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 6 kV

  Test Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-29

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Typically In Stock

  View Product Cart

• 

  EM Test CWS 500N2.2 BCI Test System

  SKU: sku-252

  Test Capabilities: RF Conducted Immunity

  Standards Met: MIL STD 461 CS 114, DO-160 CS Test

  Applications: Vehicle, Military and Aerospace, BCI Testing

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 400 MHz

  Typically In Stock

  View Product Cart

• 

  3ctest Turnkey Automotive EMI Test System

  SKU: sku-1932

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards Met: ISO 7637 ,FMC1278, ISO 16750-2 & More

  Max EUT DC Voltage (w/ Built In CDN): 60 Volts

  Max EUT DC Current (w/ Built In CDN): 30 Amps

  Peak Inrush Current Capability: 100 Amps

  Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a, 3a, 3b)

  Typically In Stock

  View Product Cart

• 

  Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6

  SKU: 10548

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4

  Applications: Bulk Current Injection Testing, RF Conducted Immunity

  CDN Test Levels (w/ built-in amplifier): 30Vrms

  BCI Test Levels (w/ built-in amplifier): 200mA

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Videos: Calibration Example, Remote Operation Setup

  MSRP:

  Was:

  Price Now:

  $19,500.00

  Typically In Stock

• 

  EM Test Automotive Test System for ISO 7637-2

  SKU: sku-596

  AS PER ISO 7637-2 THE FOLLOWING STANDARDS CAN BE COVERED: SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T,

  Electrical Fast Transients: EFT/Burst module for test pulses 3A/3B

  Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

  Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

  Micropulse: Micropulse module for test pulses 1, 2A and 6

  Trigger: automatic, manual, external, battery switch

  UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

  Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

  Inquire for availability

  View Product Cart

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: 11251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Typically In Stock

  View Product Cart

• 

  Teseq NSG 3040 Transient Immunity Test System

  SKU: 4141

  Test Capabilities: Electrical Transient and Noise, Surge Immunity, Power Failures

  Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT Voltage (w/ Built in CDN): 264 Volts

  Max EUT Current (w/ Built in CDN): 16 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  MSRP:

  Was:

  Price Now:

  $1,495.00

  In Stock

  Ordering Options

• 

  3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12

  SKU: sku-1918

  Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

  Applications: Flicker and Harmonics Testing

  Current Handling: 32 Amps per phase

  Inquire for Availability

  View Product Cart