Standards by Product/Industry

Standards by Product/Industry Test Equipment, Systems & Solutions

• 

  Teseq NSG 438 30kV ESD Simulator Gun

  SKU: 10121

  Standards Met: IEC 61000-4-2, ISO 10605

  Need to test now?: ESD Gun Rentals Ship Same Day

  Voltage Range: 200 V to 30k V (in 100 V steps)

  Polarity: Positive / negative / automatic change

  Pre-Programmed IEC Levels: Yes

  Resolution: 100 V steps

  MSRP:

  Was:

  Price Now:

  $990.00

  IN STOCK

  Ordering Options

• 

  Langer EMV P603/P750 IC Test System Probe Set for RF Conducted Measurement

  SKU: P603/P750

  Measurement Analysis: 1 Ohm / 150 Ohm

  Application: Conducted Emissions

  Test Standards: IEC 61967-4

  MSRP:

  Was:

  Price Now:

  $1,285.00

  Lead Time 2-4 Weeks

  Ordering Options

• 

  Wavecontrol WP400-3 Field Probe for IEC-EN 62822 & IEC-EN 62233 1 Hz - 400 kHz

  SKU: WP400-3

  Videos: Menu Run-Through

  Test Standards: IEC-EN 62822 & IEC-EN 62233

  Frequency Range: 1 Hz - 400 kHz

  Typically In Stock

  View Product Cart

• 

  Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts

  SKU: sku-2103

  Weight: 37 lbs

  Dimensions: 19.8 x 6.1 x 14.8 in

  Flatness: ± 1.5 dB

  Frequency Range: 0.7–4.2GHz instantaneously

  Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum

  Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts

  Impedance: 50 ohms, VSWR 2.0:1 maximum

  Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum

  Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts

  RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Standards Met: CE Mark Testing

  View Product View Product

• 

  Powerside IPC Industrial Power Corruptor/Voltage Sag Simulator

  SKU: sku-2091

  View Product Cart

• 

  Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz

  SKU: 6196

  Frequency Range: 300 kHz to 100 MHz

  Band Coverage: 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHz

  Measurement Range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H field

  Condition (Scale 5-10): 7 (Good)

  MSRP:

  Was:

  Price Now:

  $3,750.00

  In Stock

• 

  AH Systems SAS-521-4 Bilog Antenna, 25 MHz - 4 GHz

  SKU: 11920

  Antenna Factor (1 Meter): 7 to 30 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: RF EMC immunity testing, Radiated Emissions Testing, Improved high frequency gain

  Connector: N type female

  Dimensions: 22.2 in. (56.4 cm) x 38.5 in (97.8 cm) x 39 in (99.1 cm)

  Frequency Range: 25 MHz - 2000 MHz

  Gain: -28 to 7 dBi

  Impedance-2: 50 Ohms

  Maximum Continuous Power: 1000 Watts

  Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2 ,IEC 61326, ISO 11452-2

  Inquire for Availability

  View Product Cart

• 

  APREL EM-ISight-4 Electromagnetic Scanning System Single Probe Solution 9kHz – 6GHz

  SKU: sku-1650

  View Product Cart

• 

  APREL EM-ISight-4 Electromagnetic Scanning System Single Probe Solution 10kHz – 40GHz

  SKU: sku-1586

  View Product Cart

• 

  EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-1292

  Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted Immunity

  EUT Power Handling: AC up to 240V/16A

  MSRP:

  Was:

  Price Now:

  $4,750.00

  1 Unit

• 

  3ctest S6V311 Impulse Voltage Test System IEC 60065

  SKU: sku-1175

  Test Standards: IEC/EN 60065

  6 to 10 Weeks

  View Product Cart

• 

  Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-921

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product Cart