Standards by Product/Industry

Standards by Product/Industry Test Equipment, Systems & Solutions

• 

  Langer EMV P603/P750 IC Test System Probe Set for RF Conducted Measurement

  SKU: 30000

  Measurement Analysis: 1 Ohm / 150 Ohm

  Application: Conducted Emissions

  Test Standards: IEC 61967-4

  Cost New:

  Was:

  Price Now:

  $1,285.00

  Lead Time 2-4 Weeks

  Ordering Options

• 

  LANGER P512 RF Power Injection and Measurement IEC 62132-4

  SKU: 30056

  High power injection: 2 W at 12 GHz

  RF-Measurements: Up to 12 GHz

  Attenuation: Less than 3 dB up to 12 GHz

  SWR: lower than 2

  Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply Unit

  Applications: Radiated RF Immunity Testing

  Test Standards: IEC 62132-4

  Typically In Stock

  View Product Cart

• 

  Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

  SKU: sku-221

  Weight: 11 kg (24 lbs)

  Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

  Mains & EUT Connections: SHV; Screw terminals, rated for 200 A

  Standards Met: IEC / EN 61000-4-4 up to 8.8 kV

  Voltage Rating: 690 V AC RMS; 1000 VDC

  Cost New:

  Was:

  Price Now:

  $395.00

  In Stock

  Ordering Options

• 

  3ctest CWS 800 8kV Surge Combination Wave Simulator for IEC/EN 61000-4-5 up to 8 kV

  SKU: sku-797

  Weight: Approx 30 kg (66 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: Single Phase Built in, 16A, 250VAC, 120VDC

  Dimensions: 19 inch/6u

  Impedance: 2 Ohm

  Mains & EUT Connections: 4mm banana plug

  Phase synchronization: 0°-360°, 1°step or random

  Polarity: Positive, Negative, Alternate

  Pulse current (short circuit): 0.1kA-3kA ±10%

  Pulse repetition: 1-999

  Pulse voltage (open circuit): 0.2kV - 8kV ±10%

  Standards Met: IEC 61000-4-5, UL1449 and more

  View Product Cart

• 

  Rent Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

  SKU: 11305

  Max Frequency: 250 MHz

  Min Frequency: 9 kHz

  Output Power: 25 Watts

  Applications: RF Conducted Immunity, Medical

  Standards: IEC 61000-4-6, MIL-STD 461 CS114

  AC Input Power: 90-270V/1PH/200VA

  Gain: 47dB

  Cost New:

  Was:

  Price Now:

  $195.00

  Ordering Options

• 

  Teseq NSG 4070B Conducted & Radiated Immunity Test System

  SKU: 11159

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): None

  BCI Test Levels (w/ built-in amplifier): None

  Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  View Product Cart

• 

  3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

  SKU: sku-798

  Weight: Approx 44 kg (97 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Dimensions: 19 inch/6u

  Impedance: 2 Ohm

  Phase synchronization: 0°-360°, 1°step or random

  Polarity: Positive, Negative, Alternate

  Pulse current (short circuit): 0.1kA-5kA ±10%

  Pulse voltage (open circuit): 0.2kV - 10kV ±10%

  Standards Met: IEC 61000-4-5

  View Product Cart

• 

  Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines

  SKU: sku-171

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  View Product Cart

• 

  Schwarzbeck ISN S8 Impedance Stabilization Network

  SKU: 8857

  Connector to EUT: RJ45 connector | CAT 6 Cable

  Max Voltage Handling: 150 VDC | 100 VAC

  Max Current Handling: 1 Amp

  Standards Met: CISPR 22, CISPR 32, EN 55022

  Application: Shielded Data Lines Conducted Emissions Measurements

  Cost New:

  Was:

  Price Now:

  $1,800.00

  In Stock

• 

  Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines

  SKU: sku-172

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  View Product Cart

• 

  Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

  SKU: sku-219

  Application/Test Type: Automated Surge Immunity Testing

  Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 480 VAC rms Line to Line

  Inquire for Availability

  View Product Cart

• 

  Com-Power LI-550A Line Impedance Stabilization Network (LISN)

  SKU: 10114

  Weight: 14 lbs. / 6.3 kg

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 50 Amps (AC), 35 Amps (DC)

  Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

  Frequency Range: 100 kHz to 108 MHz

  Inductors: 5 µH (air-core)

  Insertion Loss: 1.5 dB (150 kHz to 30 MHz)

  Isolation: 20 - 40 dB (100 kHz to 3 MHz) 40 dB ( 3 MHz to 30 MHz)

  Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

  RF Connector: 50Ω N-type (female)

  Standards Met: CISPR 25 / CISPR 16-1-2

  Voltage Rating: 270 VAC (Line to Ground), 380 VDC

  Inquire for Lead Time

  View Product Cart