EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  EM Test VDS 200N Automotive Voltage Drop Simulators

  SKU: 1844-1

  Applications: EMC Testing on EV Electric Vehicles, Automotive Electrical Disturbances

  Max EUT DC Voltage (W/ Built In CDN): 60 Volts

  Max EUT DC Current (W/ Built In CDN): up 200 Amps

  Laws & Directives: UN ECE R10

  Automotive Standards: ISO 7637-2, SAE J1455

  Cost New:

  Was:

  Price Now:

  $1,975.00

  In Stock

  Ordering Options

• 

  FCC F-140 Bulk Current Injection Probe

  SKU: 15365

  Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

  Maximum input power: 100 Watts

  Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Hole Diameter: 1.57" ( 40mm )

  Frequency Range: 10 kHz - 1 GHz

  IN STOCK

  View Product Cart

• 

  EMC Partner MIG0603IN1 S-R Surge and Ringwave Impulse Generator

  SKU: 4582

  Standards Met: IEC/EN 61000-4-5, IEC/EN 61000-4-12

  Applications: EMC Surge, Precompliance EMC Testing

  Max EUT AC Voltage (W/ Built In CDN): 280 Volts

  Max EUT AC Current (W/ Built In CDN): 16 Amps

  Combination/Wave Surge Output Capability: 6 kV

  External Coupling: Data Lines (Surge), 3PH EUT

  Equipment Group: Ring Wave Generators/Simulators

  Cost New:

  Was:

  Price Now:

  $17,950.00

  Inquire for Availability

• 

  EM Test VDS 200N30 Voltage Drop Simulator

  SKU: sku-1844

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards Met: ISO 7637 , FMC1278, & More

  Max EUT DC Voltage (W/ Built In CDN): 60 Volts

  Max EUT DC Current (W/ Built In CDN): 30 Amps

  Rental Only

  View Product Cart

• 

  EM Test LD 200N Load Dump Generator for ISO 16750-2

  SKU: 5955

  Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

  Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

  Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

  Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

  Cost New:

  Was:

  Price Now:

  $1,690.00

  Typically In Stock

  Ordering Options

• 

  Surge, EFT, PQF, Ring Wave Immunity System for 3 Phase, 100 Amp EUT

  SKU: 12169

  Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-12 IEC/EN 61000-4-29

  Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

  Max EUT Voltage: 480 VAC and 1,000 VDC

  Max EUT Current: 100 Amps (Per Phase)

  Peak inrush current capability: 500 Amps

  EFT/Burst Pulse Output Capability: 5.5 kV

  Combination/Wave Surge Output Capability: 6.6 kV

  Ring Wave: 100 kHz, 6 kV

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  RENTAL ONLY

  View Product Cart

• 

  RESA13G Precompliant EMC Test Receiver

  SKU: 14387-1

  Frequency Range: 9 kHz - 13 GHz

  Frequency Resolusion: 1 Hz

  Real Time Bandwidth: 25 MHz (40 MHz Optional)

  Range: 0 Hz (Zero Span), 100 Hz to Max Frequency

  EMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR16-1-1)

  App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  Limit Standards: EN550xx, GB9254, FCC Part15, User defined

  Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)

  EMC Compliance Standards: CISPR 16-1-1

  Testing Type: EMC Precompliance Testing,

  In Stock

  View Product Cart

• 

  Amplifier Research DER2018 EMI Test Receiver

  SKU: 18326

  Frequency Range: 20 Hz to 18 GHz

  Standards Met: FCC Part 15, CISPR 22, MIL-STD-461

  Application/Test Type: Differences Between EMI Test Receivers and Spectrum Analyzers

  Cost New:

  Was:

  Price Now:

  $1,975.00

  Typically In Stock

  Ordering Options

• 

  3ctest APS60F30D 4-Quadrant Power Supply/Amplifier

  SKU: 11681

  Output Voltage: 60 Volts

  Output Current: 30 Amps

  Bandwidth: up to 300 kHz

  Test Standards: Pulses 4 and 2b as per ISO 7637-2:2004, Voltage variation test as per ISO 16750-2

  Applications: Automotive, EV, Battery EMC Testing

  IN STOCK

  View Product Cart

• 

  EM Test Automotive Test System for ISO 7637-2

  SKU: 10596

  ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

  SAE Automotive Standards: SAE J1113, SAE J1455

  Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

  Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

  Micropulse: Micropulse module for test pulses 1, 2A and 6

  Trigger: automatic, manual, external, battery switch

  UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

  Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Inquire for availability

  View Product Cart

• 

  EMC Partner MIG1206 12kV Surge Generator

  SKU: 6527

  Telecom Standards: IEC/EN 61000-4-5 , ITU K-series and IEC 60950

  EMC Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

  Max EUT Voltage: 480 Volts

  Max EUT Current: 32 Amps

  Combination/Wave Surge Output Voltage: 12.5 kV

  External Coupling: Data Lines (Surge), 3PH EUT

  Test Setup: EMC Surge Immunity Testing

  IN STOCK

  View Product Cart

• 

  EMC PARTNER IMU-MGE EFT/BURST, SURGE, RINGWAVE AND 10/700US IMPULSE GENERATOR

  SKU: 11126

  Test Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Setup Information: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst

  Impulse Levels: up to 8 kV

  Inquire for Lead Time

  View Product Cart