Electrostatic Discharge Immunity Test

(Showing 11 of 23)

Most engineers have fundamental EMC understanding, including the experience of witnessing the ESD testing in a test lab. The test lab often relies on the product manufacturer to determine the test points as they draft the test plan in accordance to the product compliance standard, IEC/EN 61000-4-2 is a common electrostatic discharge immunity test standard, often referred to in product standards.

Most elecrostatic discharge testing, to most standards, will instruct the technician to run a test sequence of ten discharges in one second intervals in both positive and negative polarity. The test standard may notate a ‘test environment’ consisting of a test bench and grounding plane. For pre compliance testing, this may not be necessary. But take care to not discharge near other (expensive) electronics in use. With each electrostatic discharge, an EM pulse is emitted from the simulator and can affect nearby equipment. For precompliance, ESD generators have a voltage potentiometer to identify failure thresholds.

What is an Electrostatic Discharge Immunity Test

The primary goal is to replicate electric static and apply the event to a selected amount of test points. Common locations on todays commercial electronics include a USB port and the touch screen interface. Other locations on the chassis where a user may grab the product should be tested.

Electrostatic Discharge Immunity Test Setup

The goal is to directly apply the electrostatic discharge to the product under test using the contact tip. However, in most instances where a test point is to a non-conductive surface, the air tip is used. The user pulling the trigger to charge the air tip and approach until the discharge. There may be instances where an ESD event is not observed, assuming your electrostatic generator is functioning properly, this is OK and your product passes.

Electrostatic Discharge Immunity Test Test Equipment, Systems & Solutions

Teseq NSG 437 ESD Simulator for IEC 61000-4-2 and ISO 10605

SKU: 10117

Test Standards: ISO 10605, IEC 61000-4-2,

ESD Voltage Output Range (Air/Contact): 30kV

Interchangeable R/C Modules: Yes

Battery Life: None

Applications: EV and Automotive

Voltage Resolution: 100 Volts

NEED IT FAST?: ESD Gun Rentals Ship Same Day

Additional Test Standards: IEC 60601-1-2, MIL-STD-461 CS118, RTCA DO-160

MSRP:

Was:

Price Now:

$490.00

IN STOCK

Ordering Options
Haefely ONYX 30 ESD Simulator Gun

SKU: 4753

TEST IMMEDIATELY: ESD Gun Rentals Ship Same Day

Voltage Range: 1 to 30 kV

Standards Met: IEC 61000-4-2, ISO 10605

Battery: at least 16 hour battery life

Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

Holding Time: More than 5 sec

Pre-Programmed IEC Levels: Yes

Resolution: 100V steps

MSRP:

Was:

Price Now:

$495.00

In Stock

Ordering Options
Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

SKU: sku-887

Inquire for Lead Time

View Product Cart
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 8250

Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

Standards Met: IEC 61000-4-2, ISO 10605

Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

Typically In Stock

View Product Cart
3ctest EDS MAX20 ESD Simulator

SKU: EDSM20

Test Standards: IEC/EN 61000-4-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61326, IEC 61340-3-1, ISO 14304, ITU-T K.20, Bellcore GR-1089-Core

Test Voltage: 0.5 k V - 20 k V (± 5%)

Frequency: Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz

Battery Charge time: Approx. 5 h

Typically In Stock

View Product Cart
Electro-Tech Systems 931 – Electrostatic Discharge Firing Test System

SKU: ETS-931

Features: Custom R/C combiner, Explosives safety box

Test Standards: Mil-STD 331, MIL-STD 464, MIL-DTL-23659, GJB 736.11:1990, MIL-STD-1751A, (Group 1030 Test Methods) along with MIL-STDs 1512, 1576 (Method 2205) and MIL-STD-331B (Notice 3)

Applications: Military EMC testing

CALL FOR LEAD TIME

View Product Cart
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

View Product Cart
EM Test ESD NX30 Electrostatic Discharge Simulator Gun System for up to 30kV Testing

SKU: 7395

Weight: 6.5 kg (Base Station) 1,250 g (discharge gun)

Voltage Range: 200 V - 30,000 V ± 5 %

Test Standards: ISO 10605, IEC 61000-4-2

Holding Time: More than 5 sec

Applications: EV and Automotive

Polarity: Pos / Neg

Pre-Programmed IEC Levels: Yes

Resolution: 100 V steps

Additional Test Standards: IEC 60601-1-2, MIL-STD-461 CS118, RTCA DO-160

MSRP:

Was:

Price Now:

$990.00

1 In Stock

Ordering Options
3ctest EDS 30T Electrostatic Discharge Simulator for IEC 61000-4-2

SKU: sku-713

Output Voltage: 200 – 30,000 Volts（±5%）

Battery Life: 16 Hours

Pre-Programmed IEC Levels: Yes

Resolution: 100V Volt steps

Standards Met: IEC/EN 61000-4-2, ISO 10605

Videos: Interface Overview, Setting up an ESD Test Environment

IN STOCK

View Product Cart
Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 345

Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)

Standards Met: IEC 61000-4-2, ISO 10605

Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA

Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step

Typically In Stock

View Product Cart
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2

SKU: sku-645

Voltage Range: 500V - 16,500V +/-5%

Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2

Holding Time: More than 5 seconds

Resolution: 100V steps

Rise Time: 0.8ns +/- 25%

Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh

Trigger: Automatic + Manual

View Product Cart