Conducted Emissions Test Equipment, Systems & Solutions

• 

  Langer EMV P603/P750 IC Test System Probe Set for RF Conducted Measurement

  SKU: P603/P750

  Measurement Analysis: 1 Ohm / 150 Ohm

  Application: Conducted Emissions

  Test Standards: IEC 61967-4

  MSRP:

  Was:

  Price Now:

  $1,285.00

  Lead Time 2-4 Weeks

  Ordering Options

• 

  Conducted Emissions Test Setup

  SKU: 7077

  Applications: Conducted emissions testing on power and data lines, CE Marking

  Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

  Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

  Power Handling: up to 1,000 Volts and 1,000 Amps

  OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

  OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  MSRP:

  Was:

  Price Now:

  $495.00

  In Stock

  Ordering Options

• 

  RESA Realtime EMC Spectrum Analyzer

  SKU: 2075

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  Max Frequency: 3 GHz or 7.5 GHz

  Min Frequency: 9 kHz

  Sweep/Test Speed: Fast

  Amplitude Accuracy: <0.7 dB

  Resolution Bandwidth: 1 Hz to 3 MHz

  Videos: Setting Limit Lines, Debugging Failures, Inputting Antenna Factors

  MSRP:

  Was:

  Price Now:

  $195.00

  In Stock

  Ordering Options

• 

  Com-Power CLA-050 10mm Absorbing Clamp

  SKU: sku-265

  Weight: 5 kg (11.5 lbs)

  Aperture: 12.7 mm (0.5 inches)

  Application/Test Type: Measurement of direct field strength from EUT supply cables

  Clamp factor (CF): -3 dB to +4 dB

  Dimensions: 627 x 114 x 144 mm (24.7 x .4.5 x 5.7 inches)

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 10 mm (0.39 inches)

  Min. site attenuation: 14 dB to 21 dB

  RF Connector: BNC (f), 50 Ohms

  Standards Met: CISPR 14

  View Product Cart

• 

  LISN-AC-CISPR16-10 Line Impedance Stabilization Network for CISPR16

  SKU: sku-2323

  EUT Current Handling: 10 Amps

  EUT Voltage Handling: 250 Volts

  Inductance: 50 uH

  Test Standards: CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461, ISO 60601-1-2

  Applications: Conducted Emissions Testing, CE Marking

  Videos: Debugging Failures

  MSRP:

  Was:

  Price Now:

  $195.00

  IN STOCK

  Ordering Options

• 

  LISN-CISPR16-32A Line Impedance Stabilization Network

  SKU: 6054

  EUT Current Handling: 32 Amps

  Line Voltage: It can be operated with any supply voltage which does not exceed 540V/260V, 50Hz/60Hz. It is also suitable for DC operation.

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Services Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/Characterization

  Test Standards: CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461, ISO 60601-1-2

  Inductance: 50 uH

  Videos: Debugging Conducted Emissions Failures

  MSRP:

  Was:

  Price Now:

  $3,950.00

  In Stock

• 

  LISN-CISPR16-100A 3-Phase, 100 Amp Line Impedance Stabilization Network

  SKU: 12114

  Current Rating: 100 Amps continuous

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Applications: Conducted Emissions Testing

  Standards Met: CISPR 16-1-2; VDE 0876; FCC part15; MIL-STD 461

  Voltage Rating: DC – 400V, 60Hz – 270VAC, 400Hz – 130VAC

  RF Connector: N (f)

  MSRP:

  Was:

  Price Now:

  $7,600.00

  Typically In Stock

  Ordering Options

• 

  Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

  SKU: sku-861

  Weight: 1.2 lbs. (0.55 kg)

  Connectors: 105 x 65 x 110 mm

  Current Rating: 600 mA (per line), 1.2 Amps (per pair)

  Dimensions: see photo in images

  Frequency Range: 150 kHz to 30 MHz

  Isolation: Cat 3 - 150 kHz to 30 MHz: 39.3 to 55 dB Cat 5 - 150 kHz to 2 MHz: 65 dB Cat 5 - 2 MHz to 30 MHz:: 49.3 dB to 65 dB

  Mains & EUT Connections: RJ11 and RJ45

  RF Connector: 50Ω N-type (female)

  Standards Met: CISPR 16-1-2, CISPR 22/32

  Voltage Rating: 63 VAC 100 VDC

  View Product Cart

• 

  PMM 9010 EMC/EMI Digital Receiver per CISPR 16-1-1

  SKU: sku-26

  View Product Cart

• 

  Fischer (FCC) F-16M Conducted Emissions Current Probe

  SKU: sku-572-1

  Top Frequency Range: 50 MHz

  Bottom Frequency Range: 100 Hz

  AC Current Handling (DC-400Hz): 100 Amps

  RF Current Handling (CW/Pulse): 2/50 Amps

  Style: Clamp On (Fixed Window)

  Diameter: 1.25"

  Transfer Impedance: 0.5 Ohms

  Application: Conducted Emissions

  IN STOCK

  View Product Cart

• 

  Fischer F-55 Current Emissions Probe, 10 kHz – 500 MHz, 350 Amps

  SKU: 0812

  Aperture: 32 mm

  Connector type: Type-N

  Dimensions: Internal diameter: 32 mm External diameter: 71 mm Height: 19 mm

  Frequency Range: 10 kHz - 500 MHz

  Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

  Test Standards: DO-160 Section 20, MIL-STD-461

  Typically In Stock

  View Product Cart

• 

  LG AN 200N100 Artificial Network/Switch for Transient Conducted Emission

  MSRP:

  Was:

  Price Now:

  $395.00

  Typically In Stock

  Ordering Options