FCC Part 15 LISN's

(Showing 10 of 10)

The EMC Shop specializes in emissions compliance testing and evaluation. Rent, buy or lease FCC Part 15 LISN's - Line Impedance Stabilization Networks.

  • Com-Power

    SKU: sku-597

    Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    $395.00 - $5,350.00
  • Solar EMC

    SKU: sku-302

    Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps
    Frequency Range: 10 kHz to 50 MHz
    Inductors: 50 µH (0.10 µF Coupling Capacitor)
    Mains & EUT Connections: Terminal Screw
    RF Connector: 50Ω N-type (female)
    Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)
    Voltage Rating: 500 VAC (Line to Ground), 800 VDC
  • ETS-Lindgren

    SKU: sku-287

    EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

    Weight: 10.7 lbs. / 4.9 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 10 Amps
    Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 µH/250µH
    Mains & EUT ;Connections: NEMA typical. (SCHUKO and British available upon request)
    RF Connector: 50Ω BNC Monitor
    Standards Met: FCC 15, VDE 0871, VDE 0875,
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes and EN 55022"
    Voltage Rating: 250 VAC (Line to Ground),
  • Teseq

    SKU: sku-154

    Teseq NNB 51 Line Impedance Stabilization Network Dual-Line-V-LISN

    Weight: 12 kg (26.5 pounds)
    Application/Test Type: Measure distortion signals on power mains
    Current Rating: 16 Amps Max
    Dimensions: 27.0 cm x 41.8 cm x 27.5 cm
    Frequency Range: 9 kHz to 30 MHz
    Impedance: 50 Ω
    RF Connector: N female, 50 CISPR 16-1-2=Yes"
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: YesOhms"
    RF Input Voltage: 250 Volts max
    Standards Met: CISPR 16-1-2, MIL-STD-461, FCC Part 15, ANSI C63.4
  • SKU: sku-2364-1

    FCC-LISN-50-50-4-02 Line Impedance Stabilization Network

    EUT Current Handling: 32 Amps
    EUT Voltage Handling: 540V/260V
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    Services Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/Characterization
    Test Standards: CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461, ISO 60601-1-2
    Inductance: 5 uH
    $3,950.00
    In Stock
  • PMM

    SKU: sku-57

    PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

    Weight: 50 kg (110 pounds)
    Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
    Current Rating: 63 Amps Max
    Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 63 A IEC connector
    RF Connector: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
  • PMM

    SKU: sku-53

    PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

    Weight: 16.5 kg (40 pounds)
    Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
    Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
    Dimensions: 342 x 254 x 510 mm (13.5 x 10 x 20 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
    RF Connector: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    $5,895.00