Signal Boosters for Emissions Measurements

Signal Boosters Test Equipment, Systems & Solutions

Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

SKU: sku-83

Weight: 220 grams (0.3 Lbs)

Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

Dimensions: 39 mm x 88 mm x 36 mm

Frequency Range: 1 GHz - 18 GHz

Gain: 22 dB typical (± 3 dB flatness)

Input: less than -10 dBm

VSWR: less than 2:1 typical

View Product Cart
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

SKU: sku-81

Weight: 0.27 Lb's (127 grams)

Connector: N-type 50 Ohms

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression

VSWR: less than 1.5:1

View Product View Product
AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

SKU: 3727

Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

Connector: N(f) to N(f)

Frequency Range: 20 MHz - 2000 MHz

Gain: 30.4 dB typical (29.5 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA

Maximum Continuous Power: + 6 dBm @ 1 dB compression

VSWR: 1.5:1 Input; 1.8:1 Output

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$149.00

Typically In Stock

Ordering Options
PA2500M Low Noise Amplifier, 1 - 2500 MHz

SKU: 18371

Weight: 1.45 lbs (2.5 lbs with Internal Battery)

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Connector: N(f) to N(f) (Inquire for SMA or BNC)

Dimensions: 4.25" x 2.31" x 6.73"

Frequency Range: 1 MHz - 2500 MHz

Gain: 31.5 dB typical (30 dB minimum)

Input: 120 VAC regulated P/S or 12 VDC Battery

Maximum Continuous Power: + 20 dBm @ 1 dB compression

VSWR: 2:1 Max

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$1,395.00

In Stock

Ordering Options
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

SKU: 10215

Weight: 3.3 lbs. (1.5 kg)

Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements

Connector: 50Ω N-Type (f)

Dimensions: 7.5 x 5 x 3 inches

Frequency Range: 1 MHz - 1000 MHz

Gain: 33 dB typical (± 3 dB flatness)

Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)

Maximum Continuous Power: +4 dBm @ 1 dB compression

VSWR: 1.3:1

Inquire for Availability

View Product Cart
Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz

SKU: sku-367

Weight: 3.3 lbs. (1.5 kg)

Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements

Battery: Battery Pack: Two 6 V, 0.7 A NimH

Connector: BNC (f)

Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)

Flatness: (+/-) 2 dB

Frequency Range: 100 Hz - 30 MHz

Gain: 28 dB

Impedance: 50 Ohms

Input: Max. DC Input 10 VDC, 2 dBm Input Power 12 VDC, 500 mA

View Product Cart
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: 12.5 dBm @ 1 dB compression

RF Connector: IN: N-type (f); OUT: N-type (m)

Inquire for Availability

View Product Cart