-
Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz
SKU: sku-885
Weight: 10.6 oz.Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 1.5 x 2.0 x 8 inchesFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hoursStandards Met: IEC/EN 61000-4-3$595.00Typically In Stock -
-
Narda NBM HF 0191 H-Field probe, 27MHz - 1GHz
SKU: sku-871
Frequency Range: 27 MHz to 1 GHzApplications: Magnetic Field MeasurementsTest Standards: IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10Typically In Stock -
In stock -
PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz
SKU: sku-611
Weight: 450 gApplication/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: 2 ea. AA type, re-chargeable batteriesDimensions: 96x64x465 mmFrequency Range: varies on probeOperation Time: 8 hours (typical)Probe Holder Tip: BNCRecharging Time: re-charged via supplied chargerRF Field Probes: E-FieldStandards Met: IEC/EN 61000-4-3 -
Narda PMM EP-600 Isotropic E-Field Probe 100 kHz-9.25 GHz
SKU: 6347
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.14 to 140 V/m (0.01 V/m)Frequency Range: 100 kHz to 9.25 GHzStandards Met: IEC/EN 61000-4-3Interfaces: Fiber-OpticBattery Life: 60-80 hoursTypically In Stock -
Narda NBM-520 Broadband Field Meter, 100 kHz - 60 GHz
SKU: 6278
Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probesBattery Life: 20 hoursRecharging Time: 2 hoursCalibration Status: NIST (5/22/2023)PC Interface: Fiber Optic via USB (6 ft cable)Software: NBM-TS, Tile, EMCWare, EMC32Videos: Software Setup$450.00In Stock -
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter
Frequency Range: 0 Hz (DC) to 90 GHzDisplay type: Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels)Brightness: Manual control or automatic control via brightness sensorFast data transmission: Optical interface, Ethernet, USB-COperating languages: Largely language-independent measurement control via symbols. Menu languages: English, German, more are planned. -
Narda NBM-550 Broadband Field Meter, 100 kHz - 60 GHz
SKU: sku-612
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 19.5 mm in heightFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Recharging Time: 2 hoursVideos: Software SetupTypically In Stock -
Narda NIM-511 Electric and Magnetic Field Meter
SKU: 856
Frequency Range: 100 kHz to 100 MHzElectric Field Measurement Range: 0.1 to 100 mW/cm2 (20 to 614 V/m)Magnetic Field Measurement Range: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)Inquire for Availability -
Narda SRM-3000 Selective Radiation Meter
SKU: 5773
Frequency range: 100 kHz to 3 GHzModes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time AnalysisUpper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)Display range: From noise floor up to +26 dBmMaximum RF power: +30 dBmMaximum DC voltage: 50 VIntrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuationRF Input Type: N connector, 50 ΩIN STOCK -
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe
SKU: 5497
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 1.5 to 1500 V/m (0.01 V/m)Frequency Range: 5 kHz to 9.25 GHzStandard Met: IEC/EN 61000-4-3Interface: Fiber-OpticBattery Life: 60-80 hoursDynamic Range: 1,5 to 1500 V/m, 60 dB single rangeTypically In Stock