EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

Condition:
New
Standards:
EN/IEC 61000-4-6
Application/Test Type:
Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF):
-.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz
Connector:
N-type female
Dimensions:
632 mm x 120 mm x 80 mm
Frequency Range:
10 kHz to 1000 MHz
Max. Cable Diameter:
20 mm
Maximum Continuous Power:
0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
Manufacturer:
The EMC Shop
Online Orders Ship Same Day
$595.00

 

SKU:
7851-RE
Availability:

Typically In Stock

Getting Started...

Overview

The preferred coupling and decoupling devices for IEC/EN 61000-4-6 immunity testing are the CDNs, for reasons of test reproducibility and protection of the AE. However, if they are not suitable or available, clamp injection should be used.

Often, clamp injection needs to be applied to multi-pair balanced cables because suitable CDNs might not be available. The EMIC-20 EM injection clamp establishes both capacitive and inductive coupling to the cable connected to the EUT.

The EM clamp (in contrast to the conventional current injection clamp) has a directivity ≥ 10 dB, above 10 MHz, so that defined impedance between the common-mode point of the AE and the ground reference plane is no longer required. Above 10 MHz, the behaviour of the EM clamp is similar to that of a CDN.

 

EMIC-20 Includes:

  • EM Clamp - 20mm Diameter
  • Adapter N-plug/BNC-jack
  • Calibration Set Including
    • QTY 2 Mounting Brackets with 150 to 50 Ohm adapters
    • BNC Termination, 50 Ohm, 1 Watt
    • Brass Rod with banana plugs
    • Adaptor with two banana plugs
  • User Manual
  • Calibration Certificate
  • 10% off Calibration Service for Life

Videos

Key Considerations

Manufacturer:
The EMC Shop
Standards:
EN/IEC 61000-4-6
Application/Test Type:
Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF):
-.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz
Connector:
N-type female
Dimensions:
632 mm x 120 mm x 80 mm
Frequency Range:
10 kHz to 1000 MHz
Max. Cable Diameter:
20 mm
Maximum Continuous Power:
0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Related EMC Equipment & Solutions

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6

SKU: sku-1881

Weight: approx. 7 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)
Connector: N-type female
Dimensions: 647 mm x 130 mm x 105 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

SKU: 11195

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations
Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12
Max EUT Power: 600 Voltas @ 100 Amps
Peak inrush current capability: 500 A (at 230 V)
EFT/Burst Pulse Output Capability: 4.8 kV
Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)
Generic Standards: IEC 61000-6-1, IEC 61000-6-2
Inquire for Availability
View Product Cart
EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

SKU: sku-2132

Weight: approx. 14 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): -.6 dB at 100 kHz to -2.2 dB at 1 GHz (Min -4 dB at 700 MHz
Connector: N-type female
Dimensions: 666 mm x 135 mm x 120 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 35 mm
Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart
Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides

Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides

SKU: sku-393

Application/Test Type: IEC 61000-4-20
Frequency Range: 30 to 1000 MHz
Max Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*
Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*
View Product Cart
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

SKU: sku-119

Weight: approx. 7 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)
Connector: N-type female
Dimensions: 647 mm x 130 mm x 105 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form