ANSI/IEEE Standards

(Showing 8 of 56)

The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.

IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.

Show 12 24 36 48

ANSI/IEEE Standards Categories

ANSI (IEEE) C37.90
ANSI (IEEE) C37.90
ANSI (IEEE) C62.41
ANSI (IEEE) C62.41
ANSI (IEEE) C62.45
ANSI (IEEE) C62.45
ANSI C63.2
ANSI C63.2
ANSI C63.4
ANSI C63.4
IEEE/ANSI C63.15
IEEE/ANSI C63.16
IEEE/ANSI C63.17
IEEE/ANSI C63.10
IEEE/ANSI C63.10
IEEE/ANSI C63.18
IEEE/ANSI C63.24
IEEE/ANSI C63.25
IEEE/ANSI C63.29
IEEE/ANSI C63.30
IEEE/ANSI C63.30
IEEE 299
IEEE 299
ANSI (IEEE) C12.1
ANSI (IEEE) C12.1

ANSI/IEEE Standards Test Equipment, Systems & Solutions

  • PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15 - The EMC Shop

    PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

    SKU: 10057

    Weight: 50 kg (110 pounds)
    Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
    Current Rating: 63 Amps Max
    Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 63 A IEC connector
    RF Connector: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    View Product Cart
  • 3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

    3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

    SKU: sku-798

    Weight: Approx 44 kg (97 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Dimensions: 19 inch/6u
    Impedance: 2 Ohm
    Phase synchronization: 0°-360°, 1°step or random
    Polarity: Positive, Negative, Alternate
    Pulse current (short circuit): 0.1kA-5kA ±10%
    Pulse voltage (open circuit): 0.2kV - 10kV ±10%
    Standards Met: IEC 61000-4-5
    View Product Cart
  • EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

    EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

    SKU: 10693

    Test Capabilities: EFT Immunity
    Standards Met: IEC/EN 61000-4-4
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    Max EUT AC Voltage (w/ Built in CDN): 250 Volts
    Max EUT AC Current (w/ Built in CDN): 32 Amps
    Max EUT DC Voltage (w/ Built in CDN): 270 Volts
    Max EUT DC Current (w/ Built in CDN): 32 Amps
    EFT/Burst Pulse Output Capability: 4.8 kV
    External Coupling: Data Lines & 3 Phase EUT
    INQUIRE
    View Product Cart
  • Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

    Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

    SKU: sku-219

    Application/Test Type: Automated Surge Immunity Testing
    Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)
    Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
    Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41
    Voltage Rating: 480 VAC rms Line to Line
    Inquire for Availability
    View Product Cart
  • PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC - The EMC Shop

    PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

    SKU: 8784

    Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
    Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
    RF Connector: BNC (f)
    Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15
    Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
    Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4
    Typically In Stock
    View Product Cart
  • Com-Power LI-220A 9 kHz - 30 MHz LISN for ISPR 16-1-2/ANSI C63.4

    Com-Power LI-220A 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4

    SKU: 10433

    Weight: 20.5 lbs / 9.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 20 Amperes AC, 14 Amperes DC
    Dimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cm
    Frequency Range: 9 KHz - 30 MHz
    Inductors: 250 & 50 microhenry (air-core)
    Insertion Loss: 6 dB to 1 dB
    Isolation: 20 dB to 40 dB
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    In stock
    View Product Cart
  • Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4

    Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4

    SKU: 11113

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps (AC), 35 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    $295.00
    Inquire for Availability
    Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form