ANSI/IEEE Standards Categories
ANSI/IEEE Standards Test Equipment, Systems & Solutions
-
LISN-AC-CISPR16-10 Line Impedance Stabilization Network
SKU: 8666
EUT Current Handling: 10 AmpsEUT Voltage Handling: 250 VoltsInductance: 50 uH (w/ 250 µH Choke)Applications: Conducted Emissions Testing, CE MarkingAdditional Test Standards: CISPR 16-1-2, FCC Part 15, ANSI C63.4Features: DC Capable, Artificial Hand, Simultaneous Line MonitoringIN STOCK -
Haefely FP-SURGE 100M 100 Amp Surge Immunity System
SKU: 8061
Test Capabilities: Combination Wave Surge ImmunityStandards Met: IEC/EN 61000-4-5 ANSI standards C62.41 and C62.45Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage: 690 VoltsMax EUT Current: 100 AmpsImpulse Voltage: 8 kVImpulse Current: 4 kARENTAL ONLY -
Praxsym PAMS Portable Attenuation Measurement System
SKU: 30095
Operating Frequency: 864 MHz to 936 MHzTuning Step Size: 1 MHz and 100 kHzConnectors: BNC (f)Additional Specifications: See overview for PAMS Receiver and Transmitter SpecsApplications: Radiated Immunity, Radiated Emissions, EMC Precompliance TestingTest Standards: IEC 61000-4-3In Stock -
Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network
SKU: 10857
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 100 AmperesStandards Met: ANSI C63.4, CISPR 16-1-2Frequency Range: 9 kHz - 30 MHzInductors: 50 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω - N-Type (female)Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705VTypically In Stock -
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps
SKU: 11287
Application/Test Type: Power line conducted emissions testsCurrent Rating: 10 AmpsDimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cmFrequency Range: 9 kHz to 30 MHzInductors: 50 µH/250µHMains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)RF Connector: 50Ω BNC MonitorStandards Met: FCC Part 15, VDE 0871, VDE 0875Voltage Rating: 250 VAC (Line to Ground)$195.00In Stock -
Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules
SKU: 11411
Surge/Combination Wave: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Ring Wave: EN/IEC 61000-4-12, IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Damped Oscillatory Wave: EC 61000-4-18, ANSI C37.90, IEC 60255-22-1, IEEE 1613Telecom Surge: IEC/EN 61000-4-5 , ITU K-series and IEC 60950In Stock -
Keysight N9038A-508 EMI Receiver
SKU: 11556
Frequency Range: 3 Hz to 8.4 GHzStandards Met: CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCCCalibration: Accredited ISO 17025Options: 508, B25, CNFTypically In Stock -
ALA6G Active Log Periodic Antenna
SKU: 23630
Applications: Radiated Emissions, Military & Aviation EMC TestingTest Standards: FCC Part 15, MIL-STD-461Frequency Range: 200 MHz - 6 GHzConnector: N-type (to Analyzer/Receiver)IN STOCK -
Amplifier Research DER2018 EMI Test Receiver
SKU: 18326
Frequency Range: 20 Hz to 18 GHzStandards Met: FCC Part 15, CISPR 22, MIL-STD-461Application/Test Type: Differences Between EMI Test Receivers and Spectrum Analyzers$1,975.00Typically In Stock -
RESA3G Realtime EMC Spectrum Analyzer
SKU: 2075
Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461Frequency Range: 9 kHz - 3 GHzSweep/Test Speed: FastAmplitude Accuracy: <0.7 dBResolution Bandwidth: 1 Hz to 3 MHz$495.00In Stock -
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: 10878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHzInductors: 250 & 50 microhenry (air-core)Insertion Loss: 6 dB to 1 dBIsolation: 20 dB to 40 dBMains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDC$295.00Typically In Stock -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864Equipment Group: Ring Wave Generators/SimulatorsIN STOCK