EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck NSLK 8128 Line Impedance Stabilization Network

  SKU: 12230

  Frequency Ranges: 9 kHz - 30 MHz

  Max. Voltage: 250 V AC (50 Hz/ 60 Hz); 400 V DC

  Pre-Filter Choke: 250 µH

  Test Standards: CISPR 16-1-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  APREL Helmholtz Coil

  SKU: 30147

  Field Level: 100 x current through the coils

  Coil Radius: 142mm, 118 mm, 93 mm

  Wire: AWG24 enameled magnet wire

  Number of Turns (per coil): 20

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

  SKU: 10795

  Weight: Approx. 40 kg (88 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: IEC/external

  Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

  Display Interface: 7“ touch-screen

  Impedance: 2/12 Ω

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Polarity: pos / neg / alternate

  Pulse current (short circuit): ±250 A to 7.5 kA

  Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.

  Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)

  Supply Voltage: 85 to 265 VAC, 50/60 Hz

  Test duration: 1 to 9999 pulses, continuous

  Equipment Group: Combination Wave Generators

  Test Setup Overview: Surge Immunity Test, Setup, Equipment

  VIEW PRODUCT Cart

• 

  Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

  SKU: sku-219

  Application/Test Type: Automated Surge Immunity Testing

  Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 480 VAC rms Line to Line

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq INA 6502 PQF/Dip Transformer for NSG 3060

  SKU: 3955

  Test Standards: IEC/EN 61000-4-11

  Compatible Generators: Teseq NSG 3060, Teseq NSG 3040

  Applications: Conducted Immunity

  Cost New:

  Was:

  Price Now:

  $549.00 - $1,600.00

  In stock

  ORDERING OPTIONS

• 

  Schwarzbeck VULP 9118 H Log Periodic Antenna

  SKU: 1829

  Frequency Range: 30 MHz - 1.3 GHz

  Isotropic Gain: 6.2 dBi + / - 1.2 dB

  Antenna Factor: -6 - 31 dB/m

  Max. Input Power: 2000 W (30 MHz), 300 W (1 GHz)

  Cross Polarisation: >20 dB (30 MHz...1 GHz)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research AT3000 E Field Generator

  SKU: sku-1731

  Applications: Radiated Susceptibility

  Built in Load: No

  Frequency Range: 10 kHz - 30 MHz

  Max Radiated Field Strength: 135 V/m

  VIEW PRODUCT Cart

• 

  Schwarzbeck BBHA 9120 E Double Ridged Broadband Horn Antenna

  SKU: 30148

  Nominal Frequency Range: 0.5 GHz to 6 GHz

  Usable Frequency Range: 0.5 GHz to 8 GHz

  Polarization: Linear

  Pattern Type: Directional

  Isotropic Gain: 6 to 18 dBi

  Antenna Factor: 19 to 29 dB/m

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Schwarzbeck USLP 9142 UHF-SHF Broadband Log.-Per. Antenna

  SKU: 1282

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Schwarzbeck NNBM 8126-A 890 Single Path Airborne Equipment LISN

  SKU: sku-1139

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: CISPR 25, MIL-STD-461, ISO 7637

  Max EUT DC Voltage: 1,000 Volts

  Max EUT Current: 200 Amps

  Max EUT AC Voltage (60Hz/400Hz): 400V/300V

  Inductance: 5 µH

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Solar Type 7334-1 Loop Sensor for RE01 and RE101 Magnetic Emission Tests

  SKU: sku-499

  Weight: 3 pounds (1.36 kg)

  Antennas: Loop Antennas

  Connector: BNC

  Construction: Shielding: Electrostatic

  Dimensions: 5.24" diameter (13.3 cm)

  General Data: Technical Details

  VIEW PRODUCT Cart

• 

  IFI M33 10 kHz to 230 MHz 35 Watt RF Power Amplifier

  SKU: sku-467

  Max Frequency: 230 MHz

  Min Frequency: 10 kHz

  Output Power: 35 Watts

  Applications: RF Conducted Immunity, Medical

  Standards: IEC 61000-4-6

  AC Input Power: 100-240V/1PH/300VA

  Gain: 45dB

  VIEW PRODUCT Cart