EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck STLP 9129 Stacked Logarithmic Periodic Antenna

  SKU: 30058

  Frequency Range: 70 MHz – 10 GHz

  Polarization: Linear

  Pattern Type: Diectional

  Isotropic Gain: 8.6 dBi ± 2.3 dB

  Impedance: 50 Ω

  Applications: Radiated RF Immunity Testing, Antenna Pattern Measurement

  Test Standards: IEC 61000-4-3

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Schwarzbeck USLP 9143 UHF-SHF Log. - Per. Broadband Antenna

  SKU: 1283

  Nominal Frequency Range: 300 MHz - 7 GHz

  Usable Frequency Range: 250 MHz - 8 GHz

  Isotropic Gain: typ. 5.8 dBi + / - 1.3 dB

  Antenna Factor: 14 dB/m - 43 dB/m

  Nominal Impedance: 50 Ω

  Standing Wave Ratio SWR typical: < 1.5

  Front to Back Ratio: >25 dB ( >500 MHz)

  Cross Polarisation: >20 dB (250 MHz...2.5 GHz)

  3 dB Beamwidth typ. (E-Plane): 30°-80°

  3 dB Beamwidth typ. (H-Plane): 60°-140°

  Max. Input Power: 200 W (< 500 MHz), 80 W (5 GHz), 50 W (7 GHz)

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck FMZB 1519 B Active Receive Loop Antenna

  SKU: 30112

  Frequency Range: 9 kHz – 30 MHz

  Antenna Factor for fict. E-field Strength: 20 dB/m

  Antenna Factor for H-field Strength: -31.5 dB/Ωm

  Loop Diameter: 0.5 m

  Applications: Antenna Pattern Measurement

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rigol EMI Precompliance Test Equipment Bundle

  SKU: 11165

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

  Bundle Includes: DSA710, EMI-DSA800, NFP-3, S1210 EMIs, interconnect cables

  Frequency Range: 100 kHz to 1 GHz

  Cost New:

  Was:

  Price Now:

  $259.00 - $1,295.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Radiated Emissions Testing Equipment for FCC, MIL and More

  SKU: sku-1164

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  VIEW PRODUCT Cart

• 

  Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package

  SKU: sku-1125

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

  In stock

  VIEW PRODUCT Cart

• 

  3ctest CWS X00G/SPN 38XXT Combination Wave Surge Simulator CWS

  SKU: sku-1094

  VIEW PRODUCT Cart

• 

  3ctest EFT 500G / EFTN 15100T High Voltage High-Power Intelligent EFT/Burst

  SKU: sku-1092

  VIEW PRODUCT Cart

• 

  EM Test CNV 504 Coupling/Decoupling Network

  SKU: 30017

  Test Standards: IEC 61000-4-5

  Applications: Data lines Unshielded, Symmetrical Surge Immunity

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  IFI EFG-3 E-Field Generating Antenna 1000 Watts

  Test Standards: MIL-STD-461 RS103, DO-160

  Built in Load: No

  Frequency Range: 10 kHz - 220 MHz

  Input Impedance: 50 ohms nominal

  Applications: Radiated Susceptibility

  Output Port Impedance: 50 ohms nominal

  Power Handling Capability: 1000 Watts CW

  CALL FOR LEAD TIME

  VIEW PRODUCT Cart

• 

  Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

  SKU: sku-851

  Weight: 1.5 kg (3.3 lbs)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 1000 mA maximum

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 75 Ω

  RF Connector: BNC 75 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6

  Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz

  Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $1,245.00

• 

  Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

  SKU: sku-603

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: up to 100 Amperes

  Dimensions: 19.3” x 13.9” x 2.3"

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH or 250 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  VIEW PRODUCT Cart