EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Frankonia Core-6 EMI Receiver 9 kHz–6 GHz

  SKU: 52535

  Frequency ranges: 9 kHz – 30 MHz and 30 MHz – 6 GHz

  Fully compliant: acc. to CISPR 16-1-1

  Fast measurements: by new digital design

  Integrated: 20dB pre-amplifier

  Integrated pulse limiter: Up to 30 MHz

  Detectors: Peak, quasi-peak, average, RMS, RMS-average, CISPR-average

  Automatic scan: And manual mode

  Interface: USB and RS-232 interface

  Powerful software: For full-automatic emission measurements including control of turntable and antenna masts

  Pre-programmed test: runs acc. to CISPR standards

  App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  In Stock

  VIEW PRODUCT Cart

• 

  Schaffner BEST EMC Precompliance Conducted Immunity Test System

  SKU: 30069

  Applications: EMC Precompliance Testing

  Peak inrush current capability: 500 A Peak

  Pulse amplitude: Adjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)

  Pulse current (short circuit): 125 A to 2000 A

  Test Standards: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

  Additional Test Standards: IEC 61000-4-29

  Cost New:

  Was:

  $14,500.00

  Price Now:

  $11,900.00

  In Stock

• 

  DHRA3G Double Ridged Horn Antenna

  Frequency Range: 400 MHz - 3 GHz

  Gain: 5.3 - 13.7 dBi

  VSWR: ≤ 2.5

  Size (inches): 17.8x14.2x17.7 in

  Net Weight (oz): 1.623 oz

  Material: Aluminium

  VIEW PRODUCT Cart

• 

  Com-Power CLCE-438 RF Current Monitoring Probe

  Top Frequency Range: 400 MHz

  Bottom Frequency Range: 9 kHz

  Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

  RF Current Handling (CW/Pulse): 3/800 Amps

  Test Standards: DO-160 Section 20, MIL-STD-461

  AC Current Handling (DC-400Hz): 30/50 Amps

  Diameter: 1.5"

  In Stock

  VIEW PRODUCT Cart

• 

  3c-test 7637-4R500/120 Load Resistor Isolation Capacitor Shielded Enclosure

  SKU: 21971

  Port of Front Panel: DC port, LISN port

  Port of Rear Panel: Resistor, capacitor short circuit output

  Shielded Effect: ＞80 dB

  Ambient Temperature: 15 ℃~35 ℃

  Relative Humidity: 45% ~ 75%

  Atmospheric Pressure: 86 kPa ~ 106 kPa

  Dimension: 736 mm（L）×345 mm（W）×255 mm（H）

  Weight: Approx. 17.6 kg

  Material: Aluminum

  In Stock

  VIEW PRODUCT Cart

• 

  Fischer FCC F-2031-A-DCN-32mm Decoupling Ferrite Tube

  SKU: sku-2320

  Application/Test Type: ferrite decoupling clamp

  Aperture: 32mm

  Frequency Range: 100 kHz - 100 MHz

  Standards Met: IEC/EN 61000-4-6

  Inquire

  VIEW PRODUCT Cart

• 

  10µHz–1MHz Versatile High Performance Gain/Phase Frequency Response Analyzer

  SKU: 5526

  Frequency Range: 10 µHz to 1 MHz

  Connectors: Isolated BNC

  Max Input: 100 Vpk

  Input Impedance: 1M // 50pF (exc. leads)

  Signal Generator Impedance: 50 Ω ±2%

  Applications: Conducted Emissions

  Cost New:

  Was:

  Price Now:

  $950.00 - $9,500.00

  In Stock

  ORDERING OPTIONS

• 

  Rigol RSA3030 Real-Time Spectrum Analyzer for EMC Testing

  SKU: sku-2256

  VIEW PRODUCT Cart

• 

  RIGOL NFP-3 E & H RF Near Field Probe Set 30 MHz up to 3 GHz

  SKU: 3518

  Frequency Range: 30 MHz to 3 GHz

  Terminal and Adaptor Impedance: 50 Ohm

  Connectors: SMA (M)

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

  SKU: sku-2132

  Weight: approx. 14 kg

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Clamp factor (CF): -.6 dB at 100 kHz to -2.2 dB at 1 GHz (Min -4 dB at 700 MHz

  Connector: N-type female

  Dimensions: 666 mm x 135 mm x 120 mm

  Frequency Range: 10 kHz to 1000 MHz

  Impedance: 50 Ohms

  Max. Cable Diameter: 35 mm

  Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

  Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

  VIEW PRODUCT Cart

• 

  SS1G-70 20 MHz - 1 GHz, 70 Watt RF Power Amplifier

  SKU: sku-2072

  Max Frequency: 1 GHz

  Min Frequency: 80 MHz

  Output Power: 100 Watts

  Applications: Radiated Immunity, Automotive, Medical, Military and Aerospace

  Standards: IEC 61000-4-3, ISO 11451-2, MIL-STD 461, DO-160

  Gain: 50dB

  AC Input Power: 200-240V/1PH/1kVA

  Cooling: Forced Air

  Typically In Stock

  VIEW PRODUCT Cart

• 

  LISN-MIL461-100 Line Impedance Stabilization Network

  SKU: 4020

  Frequency Range: 10 kHz to 50 MHz

  Voltage Rating: DC - 400V; 60 Hz - 270V; 400 Hz - 130V

  Impedance: 50 μH

  Current Rating: 100 A

  Applications: Conducted Emissions

  Test Standards: MIL-STD-461

  Cost New:

  Was:

  Price Now:

  $2,450.00

  In Stock

  ORDERING OPTIONS