EMC Test Equipment

(Showing 12 of 1201)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000

    Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000

    SKU: sku-444

    Weight: 69 kg (net weight)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: 3 Phase - 32 Amps, 690 VAC
    Dimensions: 45 x 50 x 57 cm (W x H x D)
    General Data: Technical Details
    Phase synchronization: 1° steps
    Polarity: pos / neg
    Pulse current (short circuit): 32A RMS
    Pulse voltage (open circuit): 690V RMS (Phase-Phase) 110V DC
    Standards Met: IEC 61000-4-5 Ed. 1 & 2 and ANSI C62.41 and C62.45
    In Stock
    VIEW PRODUCT Cart
  • EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

    EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

    SKU: 10413

    Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz
    Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value
    Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%
    Source Impedance: 50 ohm ±20%
    Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%
    Burst Duration: At least 2s
    Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value
    Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18
    Frequency: 100 kHz ± 10%
    General Data: Technical Details
    Impedance: 12ohm and 30ohm ± 20%
    Oscillation Frequency-2: 100kHz and 1MHz ± 10%
    Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;
    Polarity-2: Positive, negative
    Pulse repetition: 1 to 60 transients per minute
    Repetition Rate: Max. 5,000 /s ±10%
    Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
    Source impedance: 200ohm ± 20%
    Spike frequency: 100kHz ± 10%
    Test Voltage: 250 V - 6,000 V ± 10%
    Inquire
    VIEW PRODUCT Cart
  • 3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44

    3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44

    SKU: sku-326

    Polarity: +/-, positive first or negative first
    Weight: Approximately 300 kg
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: 1 or 3 Phase 16 Amps 250V/450V
    Impedance: 500Ω±10％
    Input voltage UIN: AC220V±10%，50/60H
    Output Current: 10/700 and 5/320±20%μs
    Polarity-2: +/-, positive first or alternate
    Pulse current (short circuit): 150A - 3kA/5kA (±10%)
    Pulse voltage (open circuit): 300V - 6kV/10kV (±10%)
    Standards Met: EN/IEC 61000-4-5, IEC 61643-1, GB/T 17626.5m GB/T 16927.1, ITU-T K21 and ITU-T K44
    Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations
    Test duration: Voltage - 50μs(±20%); Current - 20μs(±20%)
    Test Voltage: 300V～6Kv/10kV （±10%)
    Transfer Impedance: 15Ω、40Ω（25+15Ω
    VIEW PRODUCT Cart
  • Teseq ITS 6006 Radiated Immunity Test System

    Teseq ITS 6006 Radiated Immunity Test System

    SKU: 11290

    Frequency Range: 80 MHz to 6 GHz
    Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL
    Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω
    Reference frequency: 10 MHz
    $18,000.00
    In Stock
  • Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5 - The EMC Shop

    Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

    SKU: 30150

    Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2, CISPR 22
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
    $410.00 - $4,100.00
    Typically in Stock
    ORDERING OPTIONS
  • AH Systems BCP-614 RF Current Measurement Probe, 100 Amps

    AH Systems BCP-614 RF Current Measurement Probe, 100 Amps

    SKU: 0452

    Aperture: 2.6" (66 mm)
    Current Rating: 100 Amps (500 Amps DC to 400 Hz)
    Dimensions: 4.27" (134 mm)
    Frequency Range: 10 KHz - 300 MHz
    RF Connector: N-Type (female)
    Standards Met: IEC 61000-4-6; IEC 60601-1-2, Mil-STD-461 CS 114
    Transfer Impedance: -25 to 1 (dBohm)
    $250.00 - $2,750.00
    Typically In Stock
    ORDERING OPTIONS
  • Teseq CBL 6143A Compact X-Wing BiLog Antenna

    Teseq CBL 6143A Compact X-Wing BiLog Antenna

    SKU: 10115

    Impedance: 50 Ohm
    Weight: approx. 4.2 kg
    Antenna Factor (1 Meter): 7 to 33 dB/m
    Antennas: Bilogical Antennas
    Application/Test Type: RF EMC immunity testing, Improved high frequency gain
    Connector: N type female
    Dimensions: (L x H x W in mm): approx. 1525 X 980 X 410
    Frequency Range: 30 MHz to 3 GHz
    Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)
    Impedance-2: 50 Ω
    Maximum Continuous Power: 300 Watts
    Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2,
    VSWR: 2:1 Average
    Inquire for Availability
    VIEW PRODUCT Cart