EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN

  SKU: 11521

  Standards Met: IEC/EN 61000-4-4, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2

  Applications: EFT Immunity, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Max EUT DC Voltage (w/ Built in CDN): 125 Volts

  Max EUT DC Current (w/ Built in CDN): 10 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  External Coupling: Data Lines & 3 Phase EUT

  6-8 Weeks

  VIEW PRODUCT Cart

• 

  Solar 2654-2 Lightning Transient Generator for DO-160 Section 22

  SKU: 10504

  Applications: Military & Aerospace EMC

  Capabilities: DO-160 Section 22 Level III, Single & Multiple Stroke, Multiple Burst

  Test Capabilities: Level III

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power CGO-501 Comb Generator 1 MHz - 1 GHz in 1 MHz Steps

  SKU: 11421

  Weight: 2 lbs. / 0.9 kg

  AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

  Antennas: 5 and 12 inch Monopole

  Application/Test Type: EMI Radiated Site Reference Source

  Battery: 6V NiMH, 1 Ah

  Dimensions: 7 x 0.75 inches / 17.7 x 1.9 cm

  Frequency Range: 1 MHz to 1 GHz in 1 MHz steps

  Operation Time: 18 Hours Typical With Fully Charged Battery

  Polarity: Vertical and Horizontal

  Cost New:

  Was:

  Price Now:

  $395.00 - $3,900.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  EM Test DPA 500N Power Analyzer for Harmonics & Flicker

  SKU: sku-242

  Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

  Application/Test Type: Medical Device EMC Testings

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail

  SKU: 10240

  Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

  EMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264 Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

  Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EM Test VSS 500N10 High Voltage Transient Surge Simulator

  SKU: 30060

  Compatible CDN's: CNV 501S4, CNV 501S4.1, CNV 503S9, CNV 503N10.1, CNV 503S11, CNV 503S12

  Applications: Conducted Immunity

  Test Standards: IEC/EN 60065, IEC/EN 60950-1, UL 6500

  Surge Output Voltage: 500V to 10 kV

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq ISN ST08C Impedance Stabilization Network for Shielded Balanced Pairs

  SKU: sku-170

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  VIEW PRODUCT Cart

• 

  Teseq CBL 6111D Bilog Antenna, 30 MHz - 1 GHz

  SKU: 10110

  Weight: approx. 3.5 kg

  Antenna Factor (1 Meter): 6 dB/m to 24 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: Compliance emission testing

  Connector: N-type female

  Dimensions: (L x H x W in mm): approx. 1310 X 1390 X 630

  Frequency Range: 30 MHz to 1 GHz

  Gain: 5 dB

  Impedance: 50 Ω

  Maximum Continuous Power: 300 Watts

  Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, IEC 60601-1-2

  VSWR: Average 2:1

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

  SKU: 6861

  Frequency Range: 30 MHz to 1000 MHz

  Min. Site Attenuation: 13 dB to 22 dB

  Clamp Factor: -4 dB to +5 dB

  Decoupling factor DF: >21 dB

  Decoupling factor DR: >30 dB

  Applications: Conducted Emissions, Radiated Emissions

  Test Standards: CISPR 16-1-3, CISPR 16-2-2

  Cost New:

  Was:

  Price Now:

  $4,965.00

  In Stock

• 

  Narda PMM EP-600 Isotropic E-Field Probe 100 kHz-9.25 GHz

  SKU: 6347

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.14 to 140 V/m (0.01 V/m)

  Frequency Range: 100 kHz to 9.25 GHz

  Standards Met: IEC/EN 61000-4-3

  Interfaces: Fiber-Optic

  Battery Life: 60-80 hours

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Narda SHC-2/1000 CISPR Passive Voltage Probes

  SKU: 8330

  Frequency Range: 9 kHz to 30 MHz

  Input Resistance: 1500 Ω ± 80 Ω

  Insertion Loss: 30 dB ± 1.5 dB

  Applications: Conducted Emissions, Radiated Emissions

  Test Standards: CISPR, MIL-STD-461, ANSI C63.4

  Cost New:

  Was:

  Price Now:

  $295.00 - $2,950.00

  In Stock

  ORDERING OPTIONS

• 

  PMM 9010F CISPR 16-1-1 and MIL-STD-461 Compliant EMC/EMI Receiver

  SKU: 3246

  Compliant Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  Cost New:

  Was:

  Price Now:

  $750.00

  INQUIRE

  ORDERING OPTIONS