BCI200M Current Injection Clamp for IEC 61000-4-6

Condition:: New
SKU:: 11910-RE-YE-1
Availability:: In Stock
Manufacturer:: The EMC Shop

Compliant current injection clamp for IEC 61000-4-6 testing
Power rating: capable of injecting level 1, 2, 3 and stress level X up to 30V, 150 Ohm test set-up according to IEC/EN 61000-4-6
Characterized frequency range is 100 kHz to 250 MHz
Capable of clamping cable bundles up to 1 inch in diameter
Operational core temperature up to 175°F

Frequency range:: 100 kHz up to 250 MHz
Inner diameter:: 1.06" (27 mm)
Application:: RF Current Monitoring, EMC BCI Test Setup
Power Rating:: 350 mA
Insertion Loss:: 5 dB typ.; 50 Ohm system (100 Ohm loop impedance)
HOG:: Y

No reviews yet Write a Review

$395.00

in stock

Overview

The BCI200M is used to inject RF disturbances in the frequency range 150 kHz to 230 MHz onto power and/or data lines. It was designed to meet the specifications of IEC 61000-4-6 standards for immunity against radiated electromagnetic energy. The probe can also be used for RF current monitoring applications.

The insertion loss is 8 dB for most of its bandwidth and it is fully compliant with the insertion loss specification of IEC 61000-4-6. The probe is individually characterized and usable in the frequency range 100 kHz – 250 MHz. It can inject severity levels 1, 2, 3 and level X up to 30V into a conducted immunity test set-up according to IEC/EN 61000-4-6.

The aperture of the RF current monitoring probe is 27 mm. The typical insertion loss is 8 dB and the typical transfer impedance is 26 dB Ohm.