EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  AE Techron CIS-25 Aviation Conducted/Induced Susceptibility Test Kit

  SKU: 45223

  Applications: Military EMC Testing, Aerospace, Aircraft And Aviation EMC Testing

  Test Standards: Airbus ABD0100.1.8, Boeing-D6-36440E, DO160 Section 18, DO160G Section 19, MIL STD 461 CS101, MIL STD 1275E, IEC 61000 4-19

  Output Current: 0A to 25A continuous

  Bandwidth: Full Signal: DC to 300 kHz; Small Signal: 3Vp-p to 1 MHz

  Output Voltage Range: –80V to +80V

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network

  SKU: 7271

  EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wire

  EUT Load Capacity (DC): 450 V, 100 A

  Fuse: 6 A

  Max Power Consumption: 200 W

  Dimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 in

  Weight: 288 kg / 635 lbs

  Standards Met: IEC 61000-4-4, IEC 61000-4-5

  Applications: Conducted Immunity

  In Stock

  VIEW PRODUCT Cart

• 

  Langer EMV XF1 Near-Field Probes 30 MHz to 6 GHz

  SKU: LAN-XF1

  Frequency Range: 30 MHz - 6 GHz

  Connectors: SMA (m)

  Applications: E-Field, H-Field

  Resolution: < 1 mm

  Cost New:

  Was:

  Price Now:

  $239.00 - $2,639.00

  IN STOCK

  ORDERING OPTIONS

• 

  RFCP400M10k Current Probe

  SKU: 8189

  Frequency Range: 10 kHz to 400 MHz

  Maximum RMS: Current 4 A

  Test Standards: MIL-STD CS114, CS115, CS116

  Hole Diameter: 2.0 inches [50.8 mm]

  Weight: 2.2 lbs [1.0 kg]

  Nominal Transfer Impedance: -6 dBΩ

  Maximum Peak Current: 15 A

  Cost New:

  Was:

  Price Now:

  $295.00 - $4,750.00

  Typically In Stock

  ORDERING OPTIONS

• 

  The EMC Shop SS400M-75 RF Power Amplifier, 10 kHz - 400 MHz

  SKU: 12298

  Max Frequency: 400 MHz

  Min Frequency: 9 kHz

  Output Power: 75 Watts

  Applications: RF Conducted Immunity, Military and Aerospace EMC Testing

  Standards: ISO 11452-4, DO-160 Section 20, MIL-STD-461 CS 114

  Gain: 48 dB

  AC Input Power: 100-220V/1PH

  Cooling: Forced Air

  Cost New:

  Was:

  Price Now:

  $975.00 - $14,750.00

  IN STOCK

  ORDERING OPTIONS

• 

  ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification

  SKU: 5501

  Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channel

  Record Length: up to 500 Mpts

  Waveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)

  Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605

  Vertical Scales: 0.5 mV/div to 10 V/div

  Interfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMI

  Protocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Cost New:

  Was:

  Price Now:

  $395.00 - $10,950.00

  IN STOCK

  ORDERING OPTIONS

• 

  RESA Realtime EMC Spectrum Analyzer

  SKU: 2075

  Frequency Range: 9 kHz - 3.2/7.5.13.2/26.5 GHz

  Frequency Resolusion: 1 Hz

  Real Time Bandwidth: 25 MHz (40 MHz Optional)

  Range: 0 Hz (Zero Span), 100 Hz to Max Frequency

  EMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)

  Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  In Stock

  VIEW PRODUCT Cart

• 

  Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz

  SKU: 11018

  Frequency Range: 20 MHz - 18 GHz

  Measurement Type: CW, AM & Pulse

  Field Strength Range: 2 – 1000 V/m

  Dynamic Range: >54 dB

  Isotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHz

  Applications: Automotive EMC, Commercial EMC, Aviation EMC, Military EMC, Wireless R&D

  Standards Met: MIL-STD 461 RS103, DO-160

  Additional Standards Met: IEC 61000-4-3

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rent Keysight N9048B CISPR 16 EMI Receiver

  SKU: 22153

  Frequency Range: 1 Hz to 26.5 GHz

  Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

  Calibration: Accredited ISO 17025

  Options: See "Installed Options"

  Applications: Conducted Emissions, Radiated Emissions,

  Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  IN STOCK

  VIEW PRODUCT Cart

• 

  MIL-STD-461 CS101 Test Equipment Setup Rental Package

  SKU: 22047

  Test Standards: MIL-STD-461 CS101

  Applications: Conducted immunity and susceptibility, EMC precertification testing

  Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)

  Test Setup: Quick Start Guide Provided

  Shipping: Same Day, Larger Systems go Freight

  Cost New:

  Was:

  Price Now:

  $975.00 - $1,975.00

  Usually ships in 24 hours.

  ORDERING OPTIONS

• 

  3ctest Automotive EMI Test System

  SKU: 11932

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

  Max Voltage (w/ Built In CDN): 60 Volts

  Max Current (w/ Built In CDN): up to 200 Amps

  SAE Automotive Standards: SAE J1113, SAE J1455

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing

  SKU: 7384

  Application/Test Type: Radiated Immunity

  Field Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)

  Frequency Range: 10 Hz to 8.2 GHz

  Resolution: <0.01 V/m

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Typically In Stock

  VIEW PRODUCT Cart