EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Conducted Emissions Test Setup

  SKU: 7077

  Applications: Conducted emissions testing on power and data lines, CE Marking

  Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

  Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

  Power Handling: up to 1,000 Volts and 1,000 Amps

  OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

  OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  Cost New:

  Was:

  Price Now:

  $590.00

  In Stock

  Ordering Options

• 

  DO-160 Section 20 Radiated Susceptibility (RS) Test System

  SKU: 10116

  Frequency Range: 100 MHz - 18 GHz

  Electric Field Strengths: up to 200 V/m CW and 600 V/m Pulse

  Setup & Calibration: Quick Start Guide Provided

  Electric Field Probes: NIST or Accredited Calibrations

  Industry: Military & Aerospace

  Cost New:

  Was:

  Price Now:

  $9,750.00

  In Stock

  Ordering Options

• 

  Amplifier Research 40T26G40A Millimeter Wave TWTA

  SKU: 7360

  Frequency Range: 26.5 - 40 GHz

  Output Power: 40 watts

  Linear at 1dB Compression: 10 watts minimum

  Flatness: ± 8 dB

  Input for rated Output: 1.0 milliwatt maximum

  Gain (at maximum setting): 46 dB minimum

  Gain Adjustment (continuous range): 35 dB minimum

  Input Impedance: 50 ohms, VSWR 2.0:1 maximum

  Output Impedance: 50 ohms, VSWR 2.5:1 typical

  Primary Power: 99-260 V AC, 50/60 Hz single phase, 850 VA maximum

  Noise Power Density: Minus 60 dBm/Hz (maximum), Minus 70 dBm/Hz (typical)

  Harmonic Distortion: Minus 20 dBc maximum, Minus 28 dBc typical

  Cooling: Forced air (self contained fans), air entry and exit in rear

  Typically In Stock

  View Product Cart

• 

  3ctest CDN 405AF4 Surge Coupler for Unshielded Unsymmetric Lines

  SKU: 3CT-CDN405AF4

  Test Standards: EN/IEC 61000-4-5

  Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

  Data Rate: 100 Kbit/s

  Surge Voltage Handling: 6kV (10kV Available)

  Typically In Stock

  View Product Cart

• 

  Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

  SKU: 11781

  Max Cable Diameter: 20mm

  Max Current Handling: 30 Amps

  Max RF Power Handling: 5 Watts

  Frequency Range: 30 MHz - 1 GHz

  Test Standards: CISPR 16

  Cost New:

  $4,950.00

  Was:

  $4,950.00

  Price Now:

  $3,500.00

  In Stock

• 

  Sunol Sciences LP1 Antenna 200 MHz - 2 GHz

  SKU: 6940

  Gain: 6 dBi typical

  Impedance: 50 ohms nominal

  Connector: Type N female

  VSWR: 2:1 max.

  Polarization: Linear

  Max Power: 300 watts cw

  Size (LxWxH): 48 x 3 x 29.5 in, 122 x 8 x 75 cm

  Weight: 5 lb. (2 kg)

  Mounting Tube: 22 mm dia. stainless steel

  Finish: Orange powdercoat

  Cost New:

  Was:

  Price Now:

  $199.00

  Ordering Options

• 

  EMC Partner MIL3000 MG3 Impulse Test System for CS115 & CS116

  SKU: 51331

  Test Standards: CS115, CS116

  Applications: RF Current Monitoring, EMC BCI Tests

  Max EUT Current: 150 Amps @50/60Hz, 20 Amps @400Hz

  Max Cable Diameter: <5 cm

  Industry Overview: Military EMC Testing

  Typically In Stock

  View Product Cart

• 

  EM Test TSS 500N6B Telecom Surge Simulator

  SKU: 6885

  Voltage (o.c.): 50V - 600V -0/+15%, positive/negative

  Current (s.c.): 8A - 100A per wire

  Test Standards: Bellcore/Telcordia GR-1089-CORE

  Pulse duration: 1,000μs +500μs/-0μs

  Repetition rate: 1 pulse every 36s at 600V/100A per wire

  In Stock

  View Product Cart

• 

  ETS-Lindgren 3149 Hybrid Log Periodic and Biconical

  SKU: 5890

  Standards: IEC 61000-4-3, FMC 1278, GMW3097

  Gain: -5 to 9 dBi

  Application/Test Type: RF EMC immunity testing

  Frequency Range: 80 MHz - 6 GHz

  Maximum Continuous Power: 750 Watts

  In Stock

  View Product View Product

• 

  EPT-0.8 EMC Plastic Table

  SKU: 666541

  Dimensions: 31.4 in/0.8 m (D) x 31.4 in/0.8 m (H)

  Load capability: Up to 220 Lbs

  Material structure: Rohacell

  Dielectric constant e at 1 MHz: 1.05

  Material table top (removable) with a grid of 100 mm x 100 mm (3.9x 3.9 in): Pertinax t = 2 mm (0.07 in)

  Temperature working range: 10°C – 35°C

  Total weight: 15.5 lbs (7 kg)

  Standards Met: CISPR 25, MIL-STD-461

  Additional Standards Met: DO-160, ISO 10605

  Applications: EV and Automotive, Conducted Emissions

  Additional Applications: Radiated Emissions, Radiated Immunity

  Inquire for Availability

  View Product Cart

• 

  NoiseKen SWCS-900-1M Damped Oscillatory Wave Generator for IEC 61000-4-18

  SKU: 12119

  Oscillation frequency: 1 MHz

  Repetition frequency: 400 Hz

  Rise time: 75ns± 20%

  Output resistance: 200Ω± 10%

  Output waveform: Low frequency damped oscillatory wave

  Output voltage: 0.25 kV to 3.00 kV ± 10% ( 10Vstep )

  CDN capacity: Single or Three-phase AC 240V 20A, or DC 125V / 20A

  Test Standards: IEC 61000-4-18

  IN STOCK

  View Product Cart

• 

  AE Techron DSR 100-25 4-Quadrant AC/DC Voltage Source

  SKU: 12355

  Test Standards: DO-160G Section 16, MIL STD 461, SAE J1113-11, ISO 16750-2, ISO 7637-2

  Frequency Range: DC to 300 kHz

  Output Current: 25 Amps Continuous (50A Peak)

  In Stock

  View Product Cart