ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

Condition:
New

No reviews yet Write a Review
Air Discharge Voltage:
± 1V ~ 100 kV ( ± 1% ± 2 counts )
Voltage Resolution:
1 Volt up to 20 kV, 10 Volts Over 20 kV
Display:
4 ½ large LCD / LED
Standards Met:
ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
Input/Shunt Resistance:
100 GOhm
Manufacturer:
The EMC Shop

 

Availability:

Ships within 24 hours.

SKU:
35542

 

Getting Started...

Check out our Google Reviews

ESVM Overview

The ESVM high impedance, high voltage meter for ESD gun charge voltage verification is a compact, cost effetive solution to verify the electrostratic discharge produced by simulators, guns pistols and generators. The ESVM High-impedance High-voltage Meter has a Measurement range: ± 1V ~ 100kV(customization), Accuracy: ± 1% ± 2 counts, Input impedance: ≥ 10 GΩ (customizable, like 30GΩ, 100GΩ), Display: 4 1/2 large LCD, Resolution: 1V.

Applications:

  • Electrostatic voltage measurement
  • ESD generator/simulator calibration
  • Electrostatic voltmeter calibration
  • High-impedance high-voltage measurement
  • Suitable for use for ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

[split]

Specifications:

  • Range: ± 1V ~ 100 kV (customizable)
  • Accuracy: ± 1% ± 2 counts
  • Input impedance: 100 G ohm
  • Display: 4 ½ large LCD/LED
  • Resolution: 1V
  • 7.85" × 5.91" × 19.68" inch ( 20 × 15 × 50 cm )
  • 4.41 lb ( 2 kg ) 

Includes:

Videos

ESVM Key Considerations

Manufacturer:
The EMC Shop
Air Discharge Voltage:
± 1V ~ 100 kV ( ± 1% ± 2 counts )
Voltage Resolution:
1 Volt up to 20 kV, 10 Volts Over 20 kV
Display:
4 ½ large LCD / LED
Standards Met:
ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
Input/Shunt Resistance:
100 GOhm

Related EMC Equipment & Solutions

DP7 High Voltage Probe for Surge Generator Waveform Verification per IEC 61000-4-5

DP7 High Voltage Probe for Surge Generator Waveform Verification

SKU: 6533

Bandwidth: DC - 70 MHz
Attenuation: 1:100 and 1:1000
Accuracy: ±2%
Input Voltage Range: < +700V for X100, < +7000V for X1000
Output Voltage: ≤ + 7000V
Output Impedance: 50 Ω
Standard Met: IEC 61000-4-5, IEC 61010-031 Category I
Applications: Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design
$185.00 - $1,850.00
IN STOCK
ORDERING OPTIONS
Thermo Keytek ECAT High Voltage Burst/EFT Generator - The EMC Shop

Thermo Keytek ECAT High Voltage Burst/EFT Generator

SKU: 131312

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: Adjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kV
Burst time: 1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolution
Polarity: Positive, negative, alternating
Pulse amplitude: 200V to 8.0kV, ±10%; 5 V resolution
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEEE C62.41, UL 864, ANSI/IEEEC62.41, UL 1449
In Stock
VIEW PRODUCT Cart
Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

SKU: 22006

Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)
Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods
Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)
Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)
Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV
Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2
Inquire for Availability
VIEW PRODUCT Cart
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding - The EMC Shop

GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding

SKU: 30180

Ideal for: voltage bleeding to Ground Plane during Indirect ESD Immunity Testing
Compliant to: IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.
Cable rated to: 40kV High Voltage Cable (150 degrees C)
Length: 1.5 Meters (5 Feet)
Resistance: HV Precision Resistors (1% tolerance)
$198.99 - $298.99
In Stock
ORDERING OPTIONS