Impedance Stabilization Networks (Power and Dat...

(Showing 12 of 53)

Impedance Stabilization Networks  also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

Show 12 24 36 48

Impedance Stabilization Networks (Power and Dat... Test Equipment, Systems & Solutions

  • Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    SKU: sku-1080

    Weight: 550 grams (1800 grams with storage case)
    Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines
    Common Mode Impedance: 150 Ω ±20 Ω
    Current Rating: 600 mA (line), 1200 mA (pair)
    Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB
    Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)
    Frequency Range: 150 kHz to 30 MHz
    Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.
    RF Connector: BNC 50 Ω
    RF Input Voltage: 15 V max
    Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4
    Voltage Division Factor: 10 dB ±1 dB
    Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds
    View Product Cart
  • PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

    PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

    SKU: 10058

    Weight: 70 kg (154 pounds)
    Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)
    Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard
    RF Connector: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)
    View Product Cart
  • Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC - The EMC Shop

    Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

    SKU: 11665

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Dimensions: 19.3” x 13.9” x 2.3"
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    $5,795.00
    SHIPS IN 3-5 DAYS
    Ordering Options
  • Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

    Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3

    SKU: sku-861

    Weight: 1.2 lbs. (0.55 kg)
    Connectors: 105 x 65 x 110 mm
    Current Rating: 600 mA (per line), 1.2 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: Cat 3 - 150 kHz to 30 MHz: 39.3 to 55 dB Cat 5 - 150 kHz to 2 MHz: 65 dB Cat 5 - 2 MHz to 30 MHz:: 49.3 dB to 65 dB
    Mains & EUT Connections: RJ11 and RJ45
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2, CISPR 22/32
    Voltage Rating: 63 VAC 100 VDC
    View Product Cart
  • Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

    Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

    SKU: sku-395

    Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: ISPR 16-1-2, CISPR 22/32
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
    $295.00
    Ordering Options
  • FCC CISPR 22 Impedance Stabilization Network (ISN) FCC-TLISN-T4-02

    FCC CISPR 22 Impedance Stabilization Network (ISN) FCC-TLISN-T4-02

    SKU: sku-267

    Weight: 1.0 kg (2.2 pounds)
    Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.
    Common Mode Impedance: 150 ± 20Ω
    Current Rating: 250 mA Maximum
    Decoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHz
    Dimensions: 100 x 100 x 235 mm
    Frequency Range: 150 kHz to 30 MHz
    Mains & EUT Connections: D-sub 25 female
    RF Connector: 50Ω BNC female
    Voltage Division Factor: 9.5 dB ±1 dB
    Voltage Rating: 63 VAC RMS, 100 VDC
    In Stock
    View Product Cart
  • Com-Power LI-350 Line Impedance Stabilization Network

    Com-Power LI-350 Line Impedance Stabilization Network

    SKU: 10425

    Weight: 6 lbs. / 2.7 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Ampere AC, 35 Ampere DC
    Dimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cm
    Frequency Range: 10 kHz to 400 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.2 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: RTCA DO-160 / MIL-STD 461F
    Voltage Rating: 480 VAC (Line to Ground), 676 VDC
    Inquire for Availability
    View Product Cart
  • Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

    Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

    SKU: sku-581

    Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]
    Current Rating: 800 mA (per line), 1.6 Amps (per pair)
    Dimensions: see photo in images
    Frequency Range: 150 kHz to 30 MHz
    Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB
    Mains & EUT Connections: D-sub 25 pin female connectors
    RF Connector: 50Ω N-type (female)
    Standards Met: ISPR 16-1-2, CISPR 22/32
    Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
    $410.00
  • Com-Power LI-325 10 kHz - 400 MHz LISN for RTCA DO-160 / MIL-STD 461D

    Com-Power LI-325 10 kHz - 400 MHz LISN for RTCA DO-160 / MIL-STD 461D

    SKU: 10018

    Weight: 5 lbs. / 2.2 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 25 Amps (AC), 17 Amps (DC)
    Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cm
    Frequency Range: 10 kHz to 400 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.3 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: RTCA DO-160 / MIL-STD 461D
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    $295.00
    Inquire for Availability
    Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form