Overview
The Pneumatic Antenna Stand ASP 1.0/1.8-10kg is specifically designed for measurements in electromagnetic absorption chambers at a fixed measuring height.
The ASP 1.0/1.8-10kg, with the exception of the rotary actuator, is fabricated from plastic (PVC and reinforced fibreglass).
Polarisation occurs using compressed air. A solenoid valve located outside of the chamber regulates the compressed air flow.
Antenna Adapters for all commercially available antennas are available upon request. All antennas during polarisation rotate around their axis to eliminate any elevation errors.
The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU or NCD Controller.
| Technical Data | |
| Antenna height adjustable manually | 1.0 m to 1.8 m |
| Total mast height | 2.0 m |
| Load capability | max. 10 kg (when balanced) |
| For long and heavy antennas a counter weight is required to balancing the load Depending on the distance of the antenna centre of gravity | |
| Material | Plastic + reinforced fibreglass |
| Mast cross-section | 60 mm x 60 mm |
| Base L x W | 0.9 m x 0.75 m |
| Moveable with 4 casters | |
| Polarisation | 0°/90° (vert./hor.) |
| Polarisation time 0°/90° | approx. 3 sec |
| Polarisation drive | Pneumatic rotary actuator |
| Control | Solenoid valve |
| Pressure | max. 6 bar |
| Voltage | max. 2A |
| Current consumption (outside the chamber) | 208-230 VAC, 50/60 Hz, single phase |
| Temperature range | +10 °C...+35 °C |
| Total weight | approx. 25 kg |
| Accessories | Interface to SCU/MCU/NCD Controller 2x 15 m air hose Service manual |
