3ctest Test Equipment, Systems & Solutions

• 

  3ctest S6V311 Impulse Voltage Test System IEC 60065

  SKU: sku-1175

  Test Standards: IEC/EN 60065

  6 to 10 Weeks

  View Product Cart

• 

  3ctest CDN 405T8 Surge Coupler for High Speed Data Lines

  SKU: 11115

  Application/Test Type: Surge Immunity, Conducted Susceptibility

  Test Standards:

  Data Transmission Rates: 1,000MBit/s

  PoE: Yes

  Max Surge Voltage: 6kV

  In Stock

  View Product Cart

• 

  3ctest TPS-CS115 Fast Square Wave Pulse Generator for MIL-STD CS115

  SKU: sku-637

  Standards Met: MIL-STD-461 CS115

  Burst Duration: pulse width: more than 30 ns

  Pulse amplitude: 0 - 2kV

  Repetition rate: 1 - 50 Hz

  Supply Voltage: 220 V, 50-60 Hz

  In stock

  View Product Cart

• 

  3ctest DOS-CS116 Damped Sinusoidal Transients Generator for MIL-STD 461 CS116

  SKU: sku-636

  Standards Met: MIL-STD-461 CS116

  Damping Rate: 15 (plus/minus 5)

  Oscillation Frequency: 10kHz- 100MHz

  Repetition Rate: single, 0.5 Hz, 1 Hz

  Supply Voltage: 220V, 50-60 Hz

  In stock

  View Product Cart

• 

  3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

  SKU: sku-621

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Cable Diameter: up to 40 mm (1.57 in)

  Coupling Length: 1 m (39.4 in)

  Dimensions: 1040x140x110mm

  EFT Coupling Clamps: as per IEC 61000-4-4

  RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

  Standards Met: IEC/EN 61000-4-4

  Voltage Rating: up to 5.5kv

  View Product Cart

• 

  3ctest TCXS111 Power Frequency Magnetic Field Coil for IEC61000-4-8, -9, -10

  SKU: sku-602

  # of turns: single

  Dimensions: 1000*1000mm - Length*Width

  Magnetic Field Strength: 1A/m ~ 400A/m

  Standards Met: IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  4-6 Weeks

  View Product Cart

• 

  3ctest RWS 600 Ring Wave Simulator for IEC 61000-4-12

  SKU: sku-595

  Display Interface: 5.7 inch TFT touch screen

  Phase synchronization: 0°-360°, 1° step or random

  Polarity: Positive. negative, alternating

  Pulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30Ω

  Pulse voltage (open circuit): 0.25 kV–6.0kV ± 10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Test duration: 1s-99s

  4-6 Weeks

  View Product Cart

• 

  3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

  SKU: sku-594

  Weight: Approx. 35Kg+68Kg

  Coil Factor: 1000 x 1000mm

  CRO Trigger: Automatic, manual or external signal trigger

  Dimensions: 19 inch/6U/4U

  Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time

  Max input power: 100W

  Output Current: 50Hz/60Hz sine wave +/- 5%

  Repetition time: 1-9999s

  Standards Met: IEC/EN 61000-4-8, GB/T 17626.8

  Test duration: 1-28800s

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  6-8 Weeks

  View Product Cart

• 

  3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

  SKU: sku-591

  Weight: 40Kg

  Communication: Ethernet LAN、RJ45

  Coupling: BNC

  Dimensions: 19 inch/6U

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 45-65Hz

  General Data: Technical Details

  Input: BNC,5V TTL

  Mains & EUT Connections: 4mm banana line

  Maximum Continuous Power: 100W

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Phase synchronization: 0°- 360°，1° step or random

  Repetition time: 0.3-9999 cycle or 5ms-9999ms

  Rise time: 1-5us（100Ω load）

  Supply Voltage: 110V/220V, ±10%, 50/60Hz

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  View Product Cart

• 

  3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-590

  Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Mains & EUT Connections: 4mm banana line

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Applications: EMC Precompliance Testing, Conducted Immunity

  Rise time: 1-5us（100Ω load）

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  Inquire for Availability

  View Product Cart

• 

  3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

  SKU: sku-588

  Test voltage: Voltage drop: 1V max@30A

  Weight: 20 kg

  Dimensions: 19" / 4 U

  Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

  Peak current: 60A duration time 500 ms

  Pulse duration: Drop duration time td 1us - 10 s

  Repetition rate: 100 ms - 999s

  Source Impedance: High resistance or low resistance

  Test Voltage: 0–60 V

  Trigger: External trigger signal by oscilloscope, BNC,5V TTL

  Trigger of bursts: Automatic, manual, external

  View Product Cart

• 

  3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

  SKU: 4559

  Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

  Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

  Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

  Output Voltage Range: 0.25 to 4.8kV

  Condition of Used (Scale 5 - 10): 8

  Pre Programmed Test Routines: Yes

  MSRP:

  Was:

  Price Now:

  $1,395.00

  In Stock

  Ordering Options